HVAC FEATURE COMPACT WATER-COOLED CHILLERS
To meet the demand for higher efficiency yet compact water cooled chillers Airedale International has launched the TurboChill Water Cooled range said to outperform rival products. In addition to ESEER values of up to
8.86, the chiller provides a 7% increase in EER and up to 111% more cooling per square metre than its nearest competitors. Providing up to 1576kW of cooling (based on 4 modules), the TurboChill Water Cooled is a high capacity, water-cooled, single circuit chiller. Optimised for use with 3 module variants (1.96m² footprint per module) including the R1234ze TG310 range which has been specifically developed for use with the low Global Warming Potential (GWP) refrigerant R1234ze, the TurboChill Water Cooled is a truly flexible and resilient chiller, says Airedale. Its scalable modular design enables
multiple modules to be connected via a common waterside and an integrated multiple module control strategy. This means that capacity can easily be increased at a later date as requirements grow by simply adding modules. Component layout is designed to enable several units to be positioned side by side in restricted plant rooms yet still ensure easy access to essential
components. Innovative compact spray type evaporator technology means that the TurboChill Water Cooled reduces space claim (m²) by 67% and refrigerant charge (kg) by 56% yet provides the same performance when compared to a traditional flooded shell and tube evaporator of the same nominal capacity. All units incorporate the latest Centrifugal TurboCor compressor technology. These intelligent, self-optimising
compressors enable 30-100% variable speed control for tighter setpoint management and unbeatable efficiencies at part load. Magnetic bearings within the centrifugal compressor levitate the compressor shaft and with no mechanical contact or friction between mating surfaces, the need for lubrication is eliminated with near silent operation.
Airedale International T: 0113 239 1000
www.airedale.com
Capacity can easily be increased at a later date as requirements grow by simply adding modules
PLATE HEAT EXCHANGERS SUPPLIED WITH 7 DAYS
Assembled from stocked components, the BOSS i-Series of plate heat exchangers (PHE) from BSS are built to order so that fully assembled and tested units can be supplied within seven working days of order. These PHEs can be integrated with heating systems in large buildings to either form a system pressure break to protect a boiler from a dirty system or high pressure or as part of district heating, solar, biomass, heat pump or heat dump systems. To ensure that all products are fit for purpose BSS has a dedicated in-house team of experts to provide technical support. Supplied complete with mounting feet and flange studs, the BOSS i-Series complements the existing range of BOSS products to form a range that will suit all HVAC applications and budgets. Compact and light, the BOSS i-Series is a scalable and modular range that reduces installation and maintenance time to a minimum while providing the high thermal efficiency that current installations demand. Suitable for both oil cooling applications and water/water duties, the i-Series is designed to handle pressures of up to 10 bar and temperatures as high as 100ºC.
BSS Industrial T: 0116 245 5500
www.bssindustrial.co.uk
Tel: 0208 339 7370 Fax: 0208 339 7371
Unit 5 Russell House, Molesey Road Email:
sales@blackfast.com Walton-on-Thames, Surrey KT12 3PE
www.blackfast.com
/ FACTORYEQUIPMENT FACTORY EQUIPMENT | MAY 2016 21
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48
