Tools enable insert cutting

Part-off, grooving and turning tools will be the focus of the Arno (UK) stand. The SA range of part-off tools includes direct turret mounted modules and mechanically clamping indexable modules. Through-tool coolant and short overhand increase both tool life and productivity considerably, says the company. The range also includes dedicated tooling for the ever-increasing sliding head auto lathes; these tools are available with through-tool coolant. Tools for sliding head auto lathes

have become an important part of the product range and include the Deco cut range of ground on edge inserts with deeper cutting potential. Positive, ground and polished

inserts offer a choice of chip breakers and both uncoated and coated carbide grades, including a diamond coated insert for high productivity turning of aluminium, aluminium

alloys and other non-ferrous materials. The range of grooving tools for

both radial and axial grooving will be on show as well as key products for drilling and milling.

Visit Arno (UK) at stand P103

Five machines prepare cables for large and small

Five new machines will be on the Automated Cable Solutions stand. The company now offers cut,


2 5

10 M25

dford ming

1 M23 Crawley 11 orsham A24 London 7 M25

strip and crimp machines from JAM (pictured). JAM specialises in crimping the smaller range of terminals. They have a small footprint, rather than the traditional, long cable stacker, for space saving. They also supply stripping blades for all normal cut and stripping and wire strip machines. Products available include hand

M25 3 M20 5 M26 A21

Haywards Heath

A23 A272 Worthing Hove Brighton

tools, mini applicators, crimping presses, wire pull testers, cable pre- feeders, machines for cutting cable and tubing, cutting and striping, cable coiling, coax stripping, wire

A22 A21   A22 A26 A27   Give Way Mapping 2015

stripping, magnet wire stripping and braid combing. The company is an agent

Tel: 0191 482 0696. Crown Copyright . PU 100023755.

for GEM Terminal IND, Mikropla and Hatko and offer a large range of bandolier terminals for side feed and rear feed terminals for mini applicators. They also offer a wide range of loose piece end sleeve ferrules. As well as new equipment, there


is a range of used equipment for sale, including Schleuniger, Komax, Kirsten, Mecal, and Gamma. An up-to-date selection can be found on the website. The company is always looking to buy used or part-exchange machines, and will

Latest CAM releases add efficiency features

For advanced applications ranging from CNC mill and lathe programming to complex mould and die manufacturing, Autodesk’s 2017 CAM products combine the heritage of CAM software from Declam, with 3D design and manufacturing prowess, says the company. It will exhibit the 2017 releases of

Autodesk FeatureCAM for automated CNC programming and Autodesk PowerMill (pictured) for high-speed and multi-axis machining. To manufacture the most complex

moulds, dies and other components, PowerMill includes more efficient 3D offset finishing toolpaths, greater simulation controls and constraint- based logic to optimise non-cutting link moves for safer, more efficient machining. It also provides strategies to create turning routines for five-axis

mill-turn machines. FeatureCAM automates CNC

programming of milling machines, turning and turn/mill centres, Swiss lathes and wire electrical discharge machines (EDMs). It helps reduce programming time, and increase programming consistency for maintaining part quality. There are new programming capabilities for dual-path Swiss-type lathes, the ability to import and view product and manufacturing information


ASM Assembly Systems UK DEK printing and SiPlace placement products and services in the ASM Assembly Systems UK range include advanced materials deposition platforms and processes, stencils, precision screens, process support products, placement platforms and advanced workflow optimisation software for electronics assembly. Printing and placement experts will be on hand for consultations. Visit stand number H20

directly from a model and access to functionality that allows pre-drilling when using Vortex toolpaths, ruling out the need for helical ramp moves.

Visit Autodesk at stand Q103

Investment means reliable, responsive, flexible

try to find a machine if it is

not a product it stocks. The stand will have

demonstrations on the range of equipment from Carpenter, Gamma, Rittmeyer, and the new loose piece machines.

Visit Automated Cable Solutions at

stand D80 How to find us 3D CAD expands with scanners



         


CAD software, hardware, training and professional services from Benchmarq, have been expanded. Precision, 3D industrial scanners,




 

AVIATOR  

 

   QUEEN'S


Gate F Gate F, Visitor Entrance, GU14 6TQ sitor Entrance, 

 

  


the Evixscan range, can be seen at this year’s show. 3D scanning and related services include capture of whole object surfaces to an accuracy of up to 10microns, optical measurement of the scanned objects over the whole body or any selected parts of it and deviation analysis with comparison to a reference or master object/ model, typically a 3D CAD model, for enhanced quality control. A wide range of graphical, tabular and textual reports are produced, says the company, with the option of reverse engineering to recreate the geometry of scanned objects where no CAD model exists. Other services are 3D modelling


 

of proposed design changes, adaptations or modifications, stress, heat transfer and vibration simulation using finite element analysis (FEA),


Rapid development has been achieved by continually investing in the latest technology such as high precision CNC turning, grinding and EDM capability together with fully documented, vacuum heat treatment processing, believes AW Precision. The manufacturer of punch and die products and components says benefits of these investments for customers are high precision, competitively-priced products. It will exhibit punch and die, die

sets, guide elements, in die tapping and die insertion, spray lubrication system, gas spring technology and safety, and tooling accessories. It

employs a management system which is regularly assessed by the British Standards Institution for compliance with BS EN ISO 9001:2008.

Visit AW Precision at stand N14

Metrology instruments are backed with technical support

rapid prototyping and reproduction using 3D printing in a variety of materials, using the most appropriate print technology with support for CNC machine outputs. Fields of application are

manufactured components in a variety of materials, medical products, jewellery and other finely-detailed objects, architectural masonry and plasterwork, historical objects and artefacts, damaged or broken items in need of repair.

Visit Benchmarq at stand H104

Metrology instruments developed by the Bowers Group help to create and develop products that are designed to meet the exacting needs of today’s markets. A range of the newly developed products, created in its premises at Bradford, will be shown alongside the existing portfolio of calibration tools, height gauges and hand tools, material testing, vision and optical and surface finish contour and roundness instruments. As well as its range of

manufactured products, the company prides itself on its highly efficient personnel, and its levels of service, calibration and technical support. Members of technical teams will

also be on hand at the show to talk through needs and requirements. Being able to assist a customer no matter what their metrology needs was the ethos behind creating new

product ranges, says the company. It understands some measurements have become more complex but still need to be assessed, so it has created a team of experts whose remit is to find a measurement solutions for the most obscure angle. Solutions for the more challenging measurements use resource from key suppliers such as Trimos, Sylvac, Wyler, Innovatest Gagemaker and Accretech.

Visit Bowers Group at stand R139


     


       

  

             

      

 

   

 

 

 

 

  


 

                 

 

     

  

 

 

  


   


 

 

 

 

   

  

 

        

  

 

 

 

   


 

 


        

 



 

      

  

   

    

  

    

 

  

Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16