Show BITES


Sinclair & Rush Established in America in 1950, Sinclair & Rush now boasts manufacturing and distribution capabilities across North America, Europe, Asia, Latin America and Australia, supplying over 100,000 customers worldwide. The plastic, rubber and foam


components manufacturer family includes Stock Cap, Grip Works, VisiPak and Component Force, supplying high-quality protective coverings for a range of industries and markets. Customer service includes help with product selection, ease of ordering and post-sale attention. Visit stand number L67


Springmasters Springmasters, incorporating Valley Springs and Belleville Springs, is one of the leading and most diverse manufacturers of springs in the UK. As a result of multi-million pound investment, the group offers a comprehensive range of compression, extension, torsion and flat metal springs The 50,000 square foot


manufacturing facility encompasses two sites, offering CNC coiling from a wire diameter of 0.1 to 20mm, and lathe coiling up to 50mm diameter. The company will be exhibiting


a range of small and heavy duty springs for all applications along with various spring related fasteners. Visit stand number J116


Production line springs into action


Bespoke springs and pressing for a range of industries from aerospace and construction, through to IT and medical are produced by Southern Springs and Pressings. Using a variety of metals from


stainless and carbon steels to nickel alloys, the design process can be complex; the latest design techniques and machinery are essential in producing a long- lasting product. The company has recently purchased a new de-burring machine to ensure high-value-added surface improvements and a quality finish. It has also undergone a total


refurbishment and upgrade of the inspection department and has installed a new power press


Airbus air filtration housing illustrates capabilities


First-time exhibitor, Smith & Jewell, will display its range of project management, design and engineering capabilities. Its avionics air filtration main housing demonstrates its CAA-approved, fine limit sheet metal, welding and fabrication capabilities. It will also exhibit a compressed


air powered launcher used for firing grapnels and lines in military and civil applications, illustrating comprehensive CNC machining, tube


production line to produce higher volumes of products at a more efficient pace.


Visit Southern Springs and Pressings at


stand M116


Sub-contract components meet range of industry sectors


Specialising in high quality, turned and milled components, on a sub-contract basis, Sub CNC Precision serves a wide range of industry sectors. The company was established in


2008, and says that it uses state-of- the-art equipment for an edge in this highly competitive marketplace. It is ISO9001-certified and offers


stockholding for Kanban, call off and just-in-time delivery, as well as spot orders ranging from low to high volume production. Machining capacities range between 1.0 to 42mm diameter


multi-axis turned parts. All machines have twin spindles driven tooling and multiple axis, which, according to the company, ensures quality parts in one operation each time, every time.


Visit Sub-CNC Precision at stand R128


Coaxial assembly boasts two production sites


Parts are


manufactured on multi-axis equipment


bending, painting, finishing, testing and commissioning capabilities. The company is keen to meet


customers seeking supply chain partners dedicated to delivering products on time with zero defects and to discuss projects that would benefit from its engineering expertise and one-stop-shop capabilities.


Visit Smith & Jewell at stand K104


Gas struts safeguard workplaces


Gas struts, lockable gas struts and height adjustment systems will be seen at Suspa UK. Lockline lockable gas struts


can be used to recline passenger seats in buses, trains and airplanes, adjust the angle of steering columns in machinery and lorries or change the height of armrests in commercial vehicles. Customers choose between various locking characteristics and release systems. The company also offers


Movotec workbenches, Pneumatic height adjustment columns


VariStand and VariBase, as well as the electrical height adjustment system ELS3, which make a workplace more ergonomical.


Visit Suspa UK at stand L128


Electro-mechanical components service different sectors


Supplier to the manufacturing and electronics industries, TDI Tremiver holds ISO 9001 accreditation. It has over 35 years’ experience supplying manufacturers, retailers and sub-contractors, specialising in connectors, mains power cords, batteries and holders, power supplies, switches, fuses and protection products, cables and hardware. It offers premium quality


components from manufacturers’ such as Switchcraft, Neutrik, Wieland, Belden, Van Damme, and Platinum Tools, right through to low-


cost products from carefully selected Far Eastern partners. All products have been carefully


selected in response to close customer relationships, for an efficient and personal service.


Visit TDI Tremiver at stand F140


With a purpose-built production facility in the UK and managing a production facility in Slovakia, Telegartner UK is part of the German Telegärtner Group. It is ISO 9001 and ISO 14001-certified and all production staff work to IPC620A standard. Capabilities include flexible,


conformable and semi-rigid coaxial assemblies, various multi-wire assemblies, panels and looms and over-moulded cable assemblies. The company sells and markets


electro-mechanical connectivity used in various market sectors, such as railway, medical, telecomms and


industrial. As well as focusing on selling its own brand of products (including Telegärtner RF and Datavoice components), in the UK market, it represents a range of connectors, cables and speech communication products from partners Binder, Provertha, FCT, Hummel, pei tel, PRO CAR, Habia Cable, bedea, Kromberg & Schubert and Hew-Kabel. Additionally, Telegartner offers


VMI and supplier management, kitting and sub-contract services.


Visit Telegartner UK at stand H110


JOIN US AT FIVE, FARNBOROUGH, HANTS (VIA GATE F, END OF AEROSPACE BOULEVARD: SATNAT GU14 6TQ)


With over 40 years’ experience, the Techno Group supplies precision- manufactured components to a wide range of market sectors. It has a combined manufacturing facility of 35,000 sq ft and a wide engineering skill set throughout to ensure delivery of quality, continuous improvement and customer support. Both companies in the group, Technoset and Technoturn, are AS9100-accredited and manufacture parts complete on multi-axis equipment.


Visit The Techno Group at stand Q37


Sizing software applies to whole drive train


Precision gearheads, couplings, rack and pinion systems and linear or rotary actuators for any level of application, are provided by Wittenstein. The company’s stand will feature


its extensive product range including both long- established products and new additions, including the latest value line range. The Alpha Value range of gearheads offer the most economical solutions whatever the requirements for driving any axis in virtually any industry, says the company. Each input or output interface was developed


as a compatible add-on for the company’s existing portfolio. Also showcased, the latest


sizing software, Cymex 5, has been redesigned. The entire drive train (application, transformation, gearhead and motor) can now be sized and designed quicker, and more reliably, says the company, as calculations are simplified by pre- defined standard applications.


Visit Wittenstein at stand S79


WWW.INDUSTRYSOUTH.CO.UK


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16