event review | Conductive Plastics 2016
pounding screw speed for each system. Split feeding— introducing the carbon black into the already molten polymer downstream in a compounding twin-screw extruder using a side feeder—produces more consist- ent electrical conductivity properties than either feeding the carbon black with the polymer into the feed throat of the compounder or using a carbon black master- batch at the processing machine, said Van Bellingen. Stainless steel fibers (SSF) are highly effective for EMI applications, but moulders often question whether they will damage their tools, said Ned Bryant, Senior Product Development Engineer at RTP Company. He presented data, however, that showed this is an unnecessary concern. He said RTP has simulated long-term wear resistance using a thrust washer wear test and has found that SSF caused lower mould wear than glass fibre reinforcements.
Below: This multi-meter chassis is injection
moulded in an EMI shielding grade from RTP Company
Conductive novelties Innovative additives, including nanomaterials, are being tested for making plastics electrically and/or thermally conductive. Tushar Shah, Chief Technology Officer at US-based Applied Nanostructured Solutions (ANS), described the company’s Carbon Nanostructured Solution (CNS), polymers of carbon nanotubes designed to produce electrical and thermal conductivity. ANS grows the carbon nanostructures on a continuous glass fibre substrate, roll to roll, in open atmosphere, and the fibres are then chopped. CNS flake is harvested from the continuous fibre and extruded into pellets or made into granules for improved handling. CNS is unique among carbon nanotube technologies, said Shah, in that it is easy to disperse. Like other carbon nanotubes, however, it requires only low concentrations to create conductivity. Shah said the EMI shielding effectiveness of CNS compounds exceeds that of compounds with carbon nanotubes or carbon fibres and meets or exceeds the capability of aluminum or copper at some frequencies. ANS worked closely with US regulators to be sure that environmental, health, and
safety aspects of the nanomate- rials could be assured and the
company now has approval to produce
unlimited quantities. Netherlands-based CarbonX, a spinoff from the Delft University of Technology, has developed a new material that is an aggregate of carbon nanofibres chemically linked to create a porous three-dimensional network. One specific
66 COMPOUNDING WORLD | November 2016
Typical electrical resistance values of conductive plastic compounds compared to metal Source: Premix Group
grade of CarbonX presented at the conference enables isotropic improvements in a polymer compound’s strength and conductivity. The material, which is thermally stable, offers a recyclable alternative to glass fibres for mechanical enhancement, as well as improving conductivity, said Chief Technology Officer Daniela Sordi. OCSiAl Group, which launched industrial-scale
production of its TUBALL single wall carbon nanotubes (SWCNTs) in 2013, has now developed advanced conductivity solutions for polyolefins based on master- batches in PP and PE. It also has a developmental- grade concentrate for PVC. The company is currently registered in the EU (REACH) for production of up to 10 tonnes/year; US EPA registration is also underway. The SWCNTs can be melt compounded to produce conduc- tivity at low loadings, said Christian Maus, Development Leader at OCSiAl. This technology was discussed in detail in the September issue of Compounding World. Josef Krivanek, Senior Researcher at the Czech Republic Polymer Institute Brno, now part of Unipetrol, described the company’s high-structure conductive carbon black, Chezacarb. He discussed the influence of impurities on the stability of compounds and noted that metal deactivators can be used to improve this. He also noted the “skin effect” that frequently occurs in injection moulding applications, where the core of the part is more conductive than the exterior surface layer. Rick Cahill, Senior Technical Account Manager at
Milliken, presented the company’s Zelec electrocon- ductive powders for electrostatic dissipation (ESD) applications. The powders offer a number of benefits compared to conductive carbon black, including the
www.compoundingworld.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98