AWARDS 2015 TOMORROW’S HEALTH & SAFETY


ORTHOMAT ULTIMATE COBA EUROPE


COBA Europe’s Orthomat Ultimate is a high-density foam anti- fatigue mat, which provides underfoot comfort for operatives who have to stand for prolonged periods of time. It has been designed specifically for use in oily, wet or chemical-prone environments. Unlike heavy rubber mats traditionally used in these conditions, it is available in easy to handle rolls and in specified cut lengths for ease of cleaning and manoeuvrability.


Orthomat Ultimate has a unique flame-retardant outer layer, manufactured from a revolutionary PolyNit material which completely encapsulates the soft foam inner. Unlike conventional PVC foam matting, which allows liquids to seep through, causing degradation, the PolyNit outer layer totally seals the foam inner for the ultimate protective barrier. The tapered edges are heat- sealed for complete protection.


Orthomat Ultimate has a raised diamond pattern surface to provide slip-resistance even in oily or wet conditions. The patterned surface is resilient to piercing or tearing when in contact with sharp debris.


It is ideal for locations such as oily machine shops, food processing and preparation areas. Employers in these types of industries now have the opportunity to address the very serious problems of musculoskeletal disorders (MSDs) brought on by prolonged standing on hard floor surfaces.


PROFLOW 3EX SCOTT SAFETY


Scott Safety’s Proflow 3EX is the only Powered Air Purifying Respirator (PAPR) on the market that provides AX gas filtration. This opens up the use of powered air for workers requiring protection from AX gases, who were previously limited to negative pressure facemask solutions.


By using a battery powered motor that automatically draws air through the cartridge, the Proflow 3EX reduces strain on the lungs and extends the time a respirator can be worn without taking a break. In addition, the incorporation of three filters and the respirator’s optimised flow rate not only lower the respiratory breathing burden, but also offer robust protection against volatile, low-boiling organic AX vapours.


The Proflow 3 EX has ATEX approval and is suitable for use in explosive atmospheres. This makes it ideal for use in a wide variety of applications such as the pharmaceutical and oil & gas industries, where AX gases are commonly encountered.


To further enhance its ease of use, the Proflow 3EX can be used with a range of headtops, masks, accessories and other filter types to suit a range of working environments.


www.cobaeurope.com www.tomorrowshs.com


www.scottsafety.com VOTE NOW! | 13


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20