This page contains a Flash digital edition of a book.
Pulp Paper & Logistics


PROJECTS & CONTRACTS 29


Fourth line for Celupaper’s Papelera Nicaragua tissue mill


its mill at Papelera Nicaragua, near Buenos Aires. Toscotec, based at Lucca in Italy, will supply a Modulo-Plus tissue line, which become PM4 at the mill. It is the third order in two years


A


from Celupaper for Toscotec, which recently reconfigured the mill’s PM2 Fourdrinier line with the installation of a TT DOES (Drying Optimisation for Energy Saving) package, started up in 2015 and supplied a Modulo PM3 line that starts up in May of this year. The PM4 will be configured


to produce high-quality tissue products with an outputs of 65 tons a day. It wil be equipped with a single layer headbox, one press


Celupaper SA’s chief executive Mario Speranza (left) with Toscotec’s chief executive Alessandro Mennucci


configuration, TT SYD-3200MM, TT Milltech-MYH Monosystem Hood fed by natural gas and steam and condensate removal system. Approach flow system, electrification and control, as well as erection supervision, start up assistance and training


programmes are also included in the scope of supply. It is expected to be started up in 2017. Celupaper SA is part of Grupo


Vual, a leading regional tissue manufacturer in South America. It operates three manufacturing plants – Jose Juan Yapur, Celupaper


rgentine paper maker Celupaper SA has ordered a new tissue line from Toscotec for


and Papelera Nicaragua – one pulp manufacturing plant (Celulosa Alto Vale) and distribution centres at Santa Fe, Córdoba, Bahia Blanca and Buenos Aires. It has more than 700 employees. Mario Speranza, chief executive of Celupaper SA, commented: “With this series of investments we believe we will play an important role in South American market.” Alessandro Mennucci, chief


executive of Toscotec, added: “It’s an honour for us to continue the good cooperation with Celupaper. Our aim is to reach significant results in terms of productivity and of drying energy saving. The TT DOES continues to be a key technology of our lines which brings concrete benefits to our customer and takes their performance forward.”


Vallvik mill in Sweden to have white liquor filter upgrade


A white liquor filter is being supplied to the Vallvik pulp mill on the east coast of Sweden and run by Rottneros. The white liquor filter is part of the mill’s chemical recovery process. The investment is part of


Rottneros AB’s rebuild project called Agenda 500, which aims to increase availability and the total production volume at both of Rottneros AB’s pulp mills at Rottneros and Vallvik, with a target to reach a capacity of 500,000 tons per year. The larger white liquor filter


– estimated to be worth $5m – will replace an existing filter delivered by Valmet in 1990. The project includes a new


PDW-type white liquor filter, erection, start-up services, basic engineering for piping, for instrument and for electrical and process control. The PDW pressure disc filter produces completely clear white liquor and washes the lime mud. The very high white liquor yield increases upstream capacity and eliminates the potential process disturbances that increased amount of dregs and other non-


process elements in the white liquor can cause. Per-Arne Nilsson, project manager at the Vallvik mill, says: “Vallvik has great confidence in Valmet as a supplier and despite a very tough schedule, we have a good reason to assume that Valmet will deliver on time. In addition, I personally look forward to working with Valmet again because this is my third project with Valmet regarding installation of pressurized disc filter.”


Thomas Malmqvist, sales manager at Valmet, added:


“Despite being a trusted partner with Vallvik for more than 40 years in the white liquor area, the tight schedule was a challenge when pursuing this project. All people involved in the sales phase participated in the strategic and proactive work to compress the delivery time, and they deserve a big thanks for their efforts. We are very pleased and look forward to a good and safe project implementation phase.” Valmet is also delivering a new


bleach plant to the Rottneros pulp mill.


May/June 2016


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36