This page contains a Flash digital edition of a book.
Pitchcare Classifieds


factors which it is useful to consider in relation to weed control within an aquatic situation; • A disproportionate number of these species are not native


• The nutrient status of all lowland water bodies has been increasing


Water bodies are characterised by their concentration of nutrients, the main indicators being inorganic nitrogen (N) and total phosphorus (P). Although the use of nutrient levels, as a defining parameter, simplifies the complex interactions that occur between plant nutrients and the hydrological and physical characteristics of individual water bodies. However, it is useful to start considering nutrient flow through aquatic situations and managing them appropriately.


Riparian vegetation management is a complex subject. Emergent plants are easier to manage than submerged vegetation and, with a reduction of herbicides that can be used, it seems wise to look at the options for cultural management. Before any weed cutting is carried out (especially in rivers), contact the local Environment Agency Fisheries Office to check that the proposed work is appropriate.


Reeds can be cut by hand or by machine, using weed cutting buckets or boats. The choice of technique depends on the area involved, a risk assessment and on factors such as water depth, ease of access and availability of suitable equipment. Cutting only removes the emergent shoots and does not affect the buried rhizomes from which new shoots will emerge. If cutting is carried out early in the season in May or June, a second cut may be necessary before the end of the season. Also, May to early July is the period when birds are nesting and cutting should not take place before mid July unless absolutely necessary. Delaying the cut until later in July and August reduces the time for shoots to regrow before the end of the growing season. Dredging often removes the rhizomes as well as the emergent shoots and so produces longer control, but is generally too expensive to be used purely as a method of weed control. When it is anticipated that a water body infested with rushes, reeds and sedges will require dredging, it may be beneficial to spray the emergent weeds with glyphosate at least three weeks before dredging to kill the


SHOP ONLINE FOR REPLACEMENT


rhizomes and prevent their spread from dumped spoil into adjacent land.


Removal of cut weed from the water body reduces opportunities for associated invertebrates to drop off and remain in the watercourse; temporarily depositing it close to the water's edge allows mobile invertebrates to migrate back into the river. Leaving it here for longer periods can result in water pollution due to its breakdown. Risks associated with deoxygenation of the watercourse, and the provisions of the Water Resources Act, 1991, also mean that cut weed should never be allowed to remain in the water body. Some emergent weeds, particularly Phragmites australis (the Common Reed), do not decompose in the autumn and, in some situations, it may be necessary to cut and remove the dead shoots in autumn to clean the channel and prevent impedence of winter flows. There has been little research comparing the effects of manual and mechanical methods of weed cutting on stream ecology. However, mechanical cutting, using either weed cutting boats or a Bradshaw bucket mounted on a hydraulic excavator, has the potential to remove greater amounts of weed in a less selective manner than manual methods. As a consequence, the use of such devices should be avoided, unless absolutely essential. Dense bankside scrub provides a valuable habitat to many birds and mammals, especially otters. Where they exist, belts of continuous low scrub should be preserved on at least one side of the river. Dense, woody scrub can be usefully coppiced in blocks to promote strong regrowth. Any work should be carried out as late in the year as possible to avoid disturbance to otters.


Different management regimes can be applied to favour a variety of plant and animal species. Coppicing, pollarding, grass and marginal vegetation cutting should all be carried out on a rotational basis and during periods that minimise impacts to species associated with that habitat type. Single bank management should be practised where possible. As with all chemicals, herbicides should be used with care. Professional advice should be sought from a BASIS registered advisor and written consent is required from the Environment Agency for the use of glyphosate. Author: John Handley, ALS Technical Marketing Executive


BLADES, BRUSHES & QUALITY ACCESSORIES


FREE CARRIAGE ON ORDERS OVER £100 FREE CARRIAGE ON ORDERS OVER £100 TINES ROLLERS


REPLACEMENT AND SPARE PARTS


SPORTS SURFACE CONTRACTORS


email: info@agripower.co.uk www.agripower.co.uk


Tel: 01494 866776


Advertising in the classified section of Pitchcare magazine costs as little as £200 a year


Contact Peter Britton on 01952 898516


SOIL ANALYSIS


A2LA Accredited & USGA Approved physical soil testing laboratory for the analysis of construction materials for the sportsturf industry


Contact ETL on 01786 449195 email:


europeanturf@aol.com www.etl-ltd.com


Vertidraining, Hollow Coring, Overseeding, Draining, Gravel Banding, Field Top Maker, Deep Scarifying


Mobile: 07860 259692 Tel: 01284 735105


Email: peter@buryturfcare.com www.buryturfcare.com


PC APRIL/MAY 2014 l 147


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124  |  Page 125  |  Page 126  |  Page 127  |  Page 128  |  Page 129  |  Page 130  |  Page 131  |  Page 132  |  Page 133  |  Page 134  |  Page 135  |  Page 136  |  Page 137  |  Page 138  |  Page 139  |  Page 140  |  Page 141  |  Page 142  |  Page 143  |  Page 144  |  Page 145  |  Page 146  |  Page 147  |  Page 148  |  Page 149  |  Page 150  |  Page 151  |  Page 152  |  Page 153  |  Page 154  |  Page 155  |  Page 156