Total configuration: Preconfigured dynamic settings and customized settings can be downloaded from the Smart Card. This configuration is managed by the Central panel, which is connected to the controller that manages the fittings, sensors and other panels - up to a maximum of 160 addresses (on 2 lines DALI). The number of addresses can be increased by using cooperating controllers (as long as all the fittings have the same function) or non-cooperating controllers (if the fittings are placed in different spaces or need to execute different light cycles).
Partial configuration: For manual adjustments of light intensity (lux) and colour temperature (K). This configuration can be managed by Light Equalizer Zone and by the interface for the standard button panel which is connected to the controller that manages the fittings, sensors, and other panels - up to a maximum of 160 addresses. (on 2 lines DALI). The number of addresses can be increased by using cooperating controllers (as long as all the fittings have the same function) or non-cooperating controllers (if the fittings are placed in different spaces or need to execute different light cycles).
For the system definition, refer to the instructions.
Remote Control code 9840 15
80+80 luminaires (on 2 lines DALI)
Express
code 9835 15 Ambience
20+20 luminaires (on 2 lines DALI)
(4 loads/DALI addresses)
code 9838 15 Zone
40+40 luminaires (on 2 lines DALI)
(2 loads/DALI addresses)
code 9841 01 IR receiver
40+40 luminaires (on 2 lines DALI)
(2 loads/DALI addresses) Lineup Light Air Sivra Compact Remote units Main unit Luminaires