Trimmer extractable design G. Aulenti P. Castiglioni iGuzzini
MULTY-OPTICAL ASSEMBLY LUMINAIRES
• Recessed multi-lamp luminaires for use with halogen and discharge lamps, with extractable and adjustable optical assemblies.
• This fixture has an outer metal rim and a lamp compartment that is made of painted steel sheet
• The optical assemblies, single or multiple, are made of die-cast aluminium and can be extracted from the luminaire body by means of special brackets fitted with a continuous friction device.
• Rotation of the optical assemblies: - around the vertical axis (movement limited by special locks) - by 75° with respect to horizontal plane.
• All movements can be mechanically locked to assure accurate light focussing, even during maintenance.
• Electric cables that are necessary for operation of the fittings with discharge lamps are contained in the special power supply groups (to be ordered separately);
350° 190° 190° 190° 90° 60° 190° 100° 100°
compliance with norms is not guaranteed when using power supply groups not present in this catalogue. For these products, only the optical compartment is compliant with isolation class II.
• The minimum sizes of the installation compartment are displayed in the product’s instruction leaflet.
• The technical characteristics of the fitting comply with EN60598-1 standard. • IP20 • F seal • ENEC approval • Class of Insulation I (discharge lamps)
• Class of Insulation III (low voltage halogen lamps)
100°
Spotlights are adjustable The single version rotates 350° in relation to the vertical axis.The double version allows each spotlight to rotate190°.
100° Mechanical locking
In the triple version, the central spotlight rotates 90° (60° for HIT versions HIT). The 4-spot version allows each spotlight to rotate 100°.