• Ceiling-flush versions are designed for installation in false ceilings with 12.5 mm thickness.
• Lamp-holder inside the dissipator. • Luminous distributions General Lighting L.O.R > 80 and professional optic with luminance control U.G.R < 19 for spaces with VDTs.
• Metal halide versions with lamps without built-in reflector are provided with borosilicate glass protection capsule.
• LED products complete with lamp unit available in neutral white and warm white with UGR<19. Light sources with 1100 lm 2000 lm and 3000 lm power.
• Installation with torsion springs for easy recessed installation on false ceilings with thickness from 1 mm to 25 mm.
UGR<19
High output η>80% MH η>72% CFL
Easy installation and maintenance
Glass protection capsule
• Compact FL versions for general lighting and luminance control can install special diffusers (sandblasted or clear) to guarantee IP44 (round version).
• In the FL versions, by means of a device mounted above the dissipator, the lamp-holder can be positioned in accordance with the light source used.
• LED, discharge and CFL versions are supplied with electronic control gear. Control gears must be ordered separately for HIT lamps with G12 socket. Compliance with standards is not guaranteed when control gears not included in catalogue are used.
• The technical characteristics of the fitting comply with EN60598-1 standard. • IP20 • IP23 for visible body of fitting after installation • IP43 for visible body of fitting after installation for Frame versions with capsule (round)
• F seal • ENEC approval • Class of Insulation I-II-III