Remote control to command single light points, groups of lamps, light scenes or sequences.
- Version with programmable general buttons - Buttons can be configured to call in scenes - On/Off and dimmer of lamps or groups - Supply: 9 V
Available in colour 15 68 57
code
DLC-RM 2X DALI DALI 2X Electronic Relays
G681 10A
- Maximum current: 2x10A - Input voltage: 230-240 -10%, +6% Vac - Nominal frequency: 50/60 Hz - Output voltage: 2 dry contacts - DALI load: 2 mA - DALI address 2 - Maximum charge according to EN-60947 - 2500 W for resistive load (AC1) - 600 VA for inductive load (AC15) - 440 W monophasic engines
- Room temperature: 0 to +40° C - Class II - Installation on DIN track - Number of DIN modules: 4
Available in colour 00
Light sensor via Bus GG04
80 24
Device to measure natural light - Installation: support for wall fixing
- Allows automatic regulation of lamps - Control algorithm: instantaneous or mediated readings
- Control functions: set point, threshold - Supply voltage: 12 V (from the control units) - Connection to the unit control LON-DALI (G905)
Available in colour 01
9712 Wi-Fi Access Point
Device used for wireless connection to Master Pro lighting system. It can be connected to the Ethernet or in Repeating mode. Through last-generation smartphones or portable devices with WiFi connection you can: - Control lights either individually or in groups - Load scenes or sequences - Display areas and switch-on status with interactive maps in all areas covered by the service.
Available in colour 00
DLC RM-1X DALI 1X dynamic relays
200 41 15 9637 4A
- Maximum current load: 4 mA - Input tension: 230-240 -10%, +6% Vac - Network frequency: 50/60 Hz - Output voltage: 230-240 Vac - DALI load: 2 mA - DALI address 1 - Maximum load according to E-60947 - 1000 W for resistive load (AC1) - 300 VA for inductive load (AC15) - 185 W for monophasic engines
- Room temperature 0 to +40° C - Class II - Free installation
Available in colour 00
GG07 Interface for standard push-button BUS Interface
85 45 16
Device with 6 digital inputs programmable to connect pushbuttons/ switchs or sensors
- Interface for standard push-button programmable ON/OFF and dimming lamps.
- 6 digital inputs programmable - Supply for Interface BUS - Connection to the Interface BUS of control unit LON-DALI (G905)
Available in colour 00
Light Server from DIN bar 9709
Server for connection to Master Pro lighting system that controls multiple simultaneous accesses for licensed users of LightCAD and Light Touch Manager software applications. Access is permitted to:
- desktop PCs connected to the Ethernet - mobile terminals connected to the Ethernet in WiFi mode. Ethernet switch is necessary for simultaneous connection both with desktop PCs and mobile terminals.