• Made of aluminium. • The track houses the wires that are shielded by rigid extruded isolating material The isolating material has very high dielectric resistance.
Installation table L Is
• Two supply wires plus two DALI wires for product control (switch-on and dimming). • Maximum applicable load is 16A (3500/4000 VA) when track is connected to mono-phase mains.
• The lateral position of the grounding element makes the track structure asymmetrical. Therefore, the connecting joints must be chosen by keeping this in mind.
AB B track item L (mm) fluorescence 6666 1000 6667 2000
For installations other than the ones specified, calculate the hanging structure bearing in mind that the weight of the track is 1,5 kg (approx 1,5daN) per linear metre and that each suspension element supports the following loads with a safety rating of 5: 10 kg (approx. 10daN) for 9176-9177-9178-9186-9187; 10 kg (approx. 10daN) for 9179-9180-9181: 20 kg (approx. 20daN) for 9182. The use of rigid systems is recommended for track installation of spotlights heavier than 4 kg (art. 9179-9180-9181-9182).
220
500 660
• Also available: versions with T16 fluorescent modules for uplight emission with electronic and dimmable DALI control gear.
• The technical characteristics of the fitting comply with EN60598-1 standard.
• Linear mass: 1.5 Kg/m • IP20 (IP40 with PVC cover strip) • ENEC approval • Class of Insulation I