amusement park in its centre. One of
the hotel to Minneapolis city centre. Our hosts ordered us a delicious mixed grill served on inverted dustbin lids (a nice touch, and I was assured they were clean) with a selection of catfish, ribs, cajun chicken, fried onion rings, potato wedges and cornbread. Being my first
visit to the US I had to try
everything, including the local beers! We returned to the hotel and I took it upon
myself (together with others who shall remain nameless) to ensure the barman didn’t knock off early. On Wednesday the day began with a short bus ride to Toro’s parts manufacturing facility in Shakopee, Minnesota. Here they produce nearly all the steel component parts for the company’s product range. The plant runs twenty-four hours a day, five
days a week, and employs 230 people working in three shifts. We saw reels being made from scratch with the use of robotic welders. Interestingly, the steel used for the cutting blades comes from the United Kingdom. We were shown laser-cutting equipment in action, which was very impressive, and massive stamping presses, the largest having a 600 tonne capability. It was sunk into the floor to a depth of ten feet on waterproofed foundations because it was below the local water table! There were auditing rooms throughout the
plant for assessing parts’ accuracy and quality; we were given demonstrations of the laser measuring equipment, which was very quick and precise. We left Shakopee to go for lunch at a
Mexican restaurant named, but what else, El Toro. The shuttle bus driver assured me that El Toro is Spanish for lawn mower, (of course I believed him). Following lunch we returned to the hotel
for a round table discussion, moderated by Mr. Steve Keating, Toro’s Selling Skills Manager, about our thoughts and experiences with Toro parts and services. The back of the room was rowed with different Toro personnel from parts marketing to hydraulic engineers. The time went quickly and I hope it was of some value to our hosts. Wednesday evening was free time for us to visit the Mall of America, a shopping complex that is so large it has become a national tourist attraction. The building contains over 520 shops and has an
those interesting facts to emerge from the visit is, if you spent ten minutes in each shop it would take eighty-six hours to look at them all, mind boggling! On Thursday we visited the main commercial product assembly plant in the town of Tomah, Wisconsin, a three-hour coach drive! We took the scenic route along the Mississippi river. With vivid autumn colours on one side of the road, and the wide span of the Mississippi on the other, it made for a very pleasant drive and enriched the stay in America, for me anyway. We stopped twice to stretch our legs and take photos, it was a lovely day, bright, sunny and warm, I managed to get a picture of one of the Canadians sporting a pig tail that must have been a metre long! I should think he is a complete stranger to the hairdressers and not mindful at all of health and safety in the workplace. The Tomah assembly plant was established 32 years ago, it currently assembles 300 different commercial models and 30 industrial models. On the product assembly floor my initial impression was how confined the work areas were, but I later found out that this was for productivity purposes; reducing the distance a worker has to walk for a component reduces manufacturing time. The assembly lines were busy but no one appeared rushed. Instead they looked unflustered and unhurried, but very quick nonetheless. The component parts are delivered in quantity to a central point (referred to as the supermarket) for each assembly line and taken to each assembly worker when they are
needed, on a “just in time” basis to prevent cluttering up the limited work space. The Tomah plant
employs approximately 660 people with a mix of 50/50 male and female. From what I saw all the models produced here are hand built and with a great deal of pride. Without exception, everyone we spoke to made time for us and seemed to derive much job satisfaction. A couple of our group remarked what a great machine the GM 1600 was, and the person on the assembly line was obviously so pleased that we thought that of a machine they were instrumental in producing. Taking pride in
their
job appeared to be part of the work ethic in the factory and I was most impressed. Our final dinner together was at an Italian restaurant, named I Nonni, where we enjoyed excellent food, wine and good company. After dinner we parted company with some of our Toro hosts. The remainder saw us back to the hotel for a ‘few drinks’ and farewells. The barman did his duty and stayed to the bitter end, but we weren’t finished yet and had to pay a visit to a nearby bar to continue our critical research into local brews. Friday was departure day for us all but we managed to breakfast together. The four Canadians left early, Bert and Marcel, our Dutch friends, left a little while after, leaving Roy Mephram, George Hunt and myself waiting to head for the UK, and Rick Raison to catch his flight for LA and then homeward bound for Australia. The four of us decided to do a last minute bit of shopping at The Mall of America and duly caught the shuttle bus, which dropped us off outside. We browsed around looking for the perfect gifts for the folks back home, We returned to the hotel and made sure
Rick left the country, or at least got on the bus before we did some more “last minute” shopping at a local cash ‘n’ carry. There must have been reserved parking at
Heathrow because the endless trundling around we experienced at Minneapolis was much shorter and we were soon clearing customs, well and truly on our way home now.
It was a wonderful
experience all in all and I thoroughly enjoyed it from beginning to end. Those nine others were a real pleasure to meet. Australian Rick Raison was
already an “email acquaintance” before we met but, after
these few days, we parted as firm friends. I wish him and all the other visitors much
luck for the future. Gentlemen, it was a real pleasure to have met you. At this point it only remains for me to thank The Toro Company for their generosity, hospitality and flawless organisation of the visit, Lely UK for their nomination and sponsorship and The Celtic Manor Resort for allowing me to attend.
The full transcript of Cal’s visit to the USA can be read on the Pitchcare website -
www.pitchcare.com
115
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140