POWER INDUSTRY NEWS
to outperform any other OE replacement friction plate. We’ve combined a high- energy friction material and a unique groove pattern to achieve smoother shifts, greater durability, and more value for our customers.” The GPX Friction Plate’s durabil-
ity results from a world class friction material and superior groove design that withstands the heat of longer engage- ments needed to ensure smooth shifts. The product has been dynamometer and field tested to meet or exceed OE stan- dards. Available for a variety of Honda
transmissions, the GPX Friction Plate is manufactured to the highest tolerances to ensure proper fit. “This product is made in the USA
with Raybestos quality, dependability, and performance,” Avila said. “Rebuilders will find the GPX to be a superior OE replacement without the OE cost.” For more information about the
GPX Friction Plate for Honda and other Raybestos Powertrain product innova- tions, contact Raybestos Powertrain LLC, 800-729-7763 or visit their web site at
www.raybestospowertrain.com.
CORTECO’s New 4L60/65/70E Bonded Valve Body Separator Plate Gaskets
Introducing the Revolution® Lift
brand of vehicle lifts, from the world’s leading lift manufacturer and available throughout North America from local Rotary Lift distributors. The Revolution Lift line offers quality, safety, and overall value at a competitive price. “With the many economic challeng-
The valve body separator plate and
gaskets for the 4L60E family has been a three-piece design since inception in 1993. Beginning with some 2006 models, General Motors started producing the valve body separator plate with the gas- kets bonded to the plate. The new bonded separator plates
have three screens sandwiched between the gasket and plate. Two of the screens are in the same locations as the early style plates that use screens that snap into
78
es facing shops today, it’s more important than ever to buy the right equipment at the right price. In the past, shop owners have been willing to sacrifice value for low price when choosing which vehicle lifts to install,” says John Rylee, director of marketing. “Now they don’t have to.” The Revolution line includes lift
models most commonly found in North American independent repair shops: two- post, four-post, and specialty. Also avail- able are a 6000 lb. mid-rise lift and a motorcycle lift. Technician productivity and wellbe-
When used in 2003-2009 Chrysler,
Dodge, and Jeep 4WD applications, the 42RLE’s output shaft is retained to the rear planet with a squared circlip; similar to most front wheel drive axles but much more permanent. To disassemble the unit completely,
you must remove the output shaft to gain access to the large nut holding the rear planet. With the new T-8200 tool from Adapt-A-Case, your slidehammer makes
GEARS May/June 2010
the plate. The third screen was added to the same oil circuit (actuator feed limit) as the previous two. The purpose of the third screen is to recoup some of the fil- tering surface area lost due to the new flat screens (see illustration for locations). CORTECO is pleased to announce
that all TransTec® brand 2004-up 4L60/65/70E kits with date code 3/22/10 and later contain valve body gaskets to service units that come with the bonded plates. Part number B36483 is the lower gasket; B36484 is the upper gasket. Both gaskets will have an orange
stripe for easy identification. Use of these gaskets will require installation of the original snap-in screens. Since the origi- nal snap-in screens supply enough filter- ing surface area, no screen is necessary at the new (third) location. For more information, visit
CORTECO and TransTec on line at www.
TransTec.com.
New Revolution® Lift Line Offers Quality and Value at the Right Price
ing are paramount at Revolution Lift. All Revolution two-post and four-post lifts wear the “gold label” that demonstrates they’ve been third-party tested by ETL, and ALI certified to meet ANSI/ALI ALCTV-2006 safety standards. They’re manufactured in an ISO 9001-certified facility owned by Revolution’s parent company, Vehicle Service Group (VSG). Revolution lifts are backed by more
than 85 years of lift design and manu- facturing experience, plus an unmatched network of factory-trained distributors and installers who provide convenient installation, parts, and service. To learn more about Revolution Lift,
contact your local Rotary Lift distributor, log on to
www.revolutionlift.com or call (800) 604-3359.
New 42RLE Circlip Remover from Adapt-A- Case Makes Output Shaft Removal Easy
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92