Page 74
www.us-tech.com
Test for gross and fine leaks in as little as 6 minutes.*
February, 2016
EMI Filter Intros PXS Series with “Talon Grip”
Clearwater, FL — EMI Filter Com - pany, a division of Nordquist Dielec - trics, has introduced its PXS series of filters with its patented “Talon Grip” filter body. The filter body is non-compressive and self-center- ing, and allows for removal and repositioning if necessary, without part or board damage. Similar to the PZ series, the
filters are 0.5in (12.7mm) long from one tip of the 0.2in (5.1mm) diameter lead to the other. The body, centered on the lead
Only NorCom optical leak technology detects both gross and fine leaks in hermetically sealed packages, this fast. Instead of using multiple technologies
and processes, you can leak test virtually any type of package with one high-speed system. The NorCom 2020™
series inspects hermetically sealed components to
MIL-STD 883 requirements either in seam seal trays, or when already mounted to circuits boards and assemblies. It automatically rejects failed devices, and reports the leak rate for each part, eliminating “divide and conquer”leak testing.
NorCom 2020™
Try it free. Send us your package samples today, for a leak test evaluation and report at no charge. *Note: Test time is dependent on package volume
www.norcomsystemsinc.com
610-592-0167 1055West Germantown Pike Norristown, PA 19403 USA
pin, is 0.1in (2.5mm) long, 0.11 (2.8mm) in diameter, and 0.12in (3mm) across the flange. It can be installed easily in a 0.1in (2.5mm) hole. The company has made these filters available in values up to 0.01µF.
Contact: EMI Filter Company,
12750 59th Way North, Clearwater, FL 33760 % 727-585-7990
Size comparison: small filters available from EMI Filter.
fax: 727-586-5138 E-mail:
sales@emifiltercompany.com Web:
www.emifiltercompany.com
See at ATX/MD&M West, Booth 3566
Altech Intros Spring Clamp Terminal Blocks
Flemington, NJ — Altech Corpora - tion, a supplier and distributor of electronic and control components, has introduced its CX series of spring clamp terminal blocks, which is up to 20 percent smaller than the compa- ny’s previous similar series. The CX includes a center mark-
ing area for circuit identification and cutouts for ferruled wires. Also, push- in jumpers are available in 2, 3, 4, and 10 pole configurations, with two jumper channels. The spring clamp design eliminates screws and any screw torque requirements. The clamp has a high contact force, which pro- vides secure connections for applica- tions with shock and vibration issues. The blocks are well-suited for ele-
vators, vehicles, and machines. The company offers many types
of spring terminal blocks, for example, feed-through, multiple connection,
ground/earth, multiple connection ground/earth, double level, side-entry feed-through, and panel mount.
CX series spring clamp terminal block.
Contact: Altech Corporation, 35
Royal Road, Flemington, NJ 08822 % 908-806-9400 fax: 908-806-9490
E-mail:
info@altechcorp.com Web:
www.altechcorp.com
See at ATX/MD&M West, Booth 3740
Divelbiss: Bear Bones PLCs are IoT and Telematics Ready
Fredericktown, OH — Divelbiss Cor - por ation, a manufacturer of products for the electronics and industrial con- trol industry, has introduced en - hanced models and expansion options for the P-Series Bear Bones family of OEM programmable logic controllers. The series offers powerful control capabilities and is now ready for Internet of Things (IoT) and telemat- ics applications through the Versa - Cloud M2M platform. The Bear Bones family provides flexibility for connect- ing to and controlling equipment, com- municating with various serial bus protocols, logging system data, or adding Internet of Things and telem- atics capability to existing systems. The series of PLCs are mounted
with industry standard standoffs. They come with eight digital inputs and outputs rated at 2A each, and eight analog inputs which are config- urable from 0 to 5V, 0 to 10V, or 0 to 20mA. One CAN port is available and supports the SAE J1939 protocols, the NMEA2000 protocols and can be used to communicate with digital I/O expan- sion boards and other controllers using OptiCAN. By using plug-in expansion boards, the PLCs can have cellular and
Wi-Fi capabilities for communication with the Versa Cloud M2M platform. A GPS option is also available. Ethernet and Wi-Fi ports can be used for MOD- BUS TCP Server and Client communi- cations. For applications that require data logging, the PLC family is avail-
P-Series Bear Bones PLC.
able with a real-time clock, 512K of battery-backed SRAM, and can accept a micro SD card. The PLCs support supply and I/O voltages from 8 to 32VDC and 90 to 130VAC and operate in a temperature range of
–40 to +80°C (–40 to +176°F). Contact: Divelbiss Corporation,
9778 Mt. Gilead Road,
Fredericktown, Ohio 43019 % 800-245-2327 fax: 740-694-9035 E-mail:
terry.divelbiss@divelbiss.com Web:
www.divelbiss.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96