Security From previous page How easy would it be to offer a couple of
external PIR lighting/surveillance/sound units, which can be fitted in a matter of minutes, while on a site working on an alarm for example? You only have to take a quick look around your neighbourhood to see that old, corroded and out of order security lights are widespread. Yet, a fully functioning, replacement solution, such ESP’s GuardCam LED external area protection system, can be installed in no more than 15 minutes and without the need for additional cabling.
Straightforward GuardCam LED is a complete, all-in-one, energy- efficient PIR LED floodlight, camera, speaker and DVR system. The system is straightforward to install – you simply connect to the mains power, fix to the wall, set the time and date and it’s ready to go. Once switched on, GuardCam will detect an intruder, floodlight the area, initiate a high resolution video recording directly to an internal SD card and if selected, an audible warning can be delivered. Designed as a comprehensive yet relatively low cost and easy to install solution to the protection of external spaces, GuardCam comes in a handy kit format that is currently unrivalled on the market and is ideal for the protection of external areas around homes, offices, or industrial and agricultural units. Where maximum installation flexibility and speed is required, where there is no available mains power, or simply where a more covert external area protection (EAP) solution is required, a battery powered system should be considered. This solution provides high resolution capture of still or video camera recordings onto a removable SD card. Images can be continuous or automatically triggered by a built-in PIR with illumination provided by integral black infra-red LED’s. Combined with a robust and fully weatherproof outer casing and powered by integral batteries, this provides a fully portable, standalone and instant deployment recording solution for a wide variety of applications. These can include the protection of site cabins, vehicles, vacant caravans, as well as the prevention of anti-social behaviour, or fly tipping, to name just a few of the myriad possibilities for providing protection where no mains power is available and where a quick and simple installation is required.
Since it added a new rapid deployment
surveillance camera to its growing External Area Protection (EAP) portfolio in 2013, ESP has seen a huge increase in the number and range of
Battery operated CanCam is a high resolution surveillance camera with integral PIR detector, ideally suited for semi covert, instant deployment security operations and designed for external or internal use.
applications for this product. The company’s CanCam is a battery operated, high resolution surveillance camera with integral PIR detector, SD card recording and black infra-red illumination. It is ideally suited for semi covert, instant deployment security operations and designed for external or internal use – designed to detect movement and instantly record high quality images with time and date stamping, in all conditions day and night.
Resolution Among the many user settings the image capture type and resolution is selectable – either video with audio up to HD720P or stills up to 8MP recording directly to the 4GB SD card supplied. When the card is full, there is an over write option. Alternatively, it is possible to use higher capacity cards up to 32GB. Recordings are taken from the removable SD card using windows media player for simple playback and transfer. Recorded footage can also be viewed directly via a PC or TV. The service life of the CanCam’s battery pack varies according to the resolution and image
mode. However, an optional plug-in power supply is included for more permanent use. The camera has a high quality 6mm lens to match the detection angle of the PIR, is designed for pole or wall mounting and has an IP55 weatherproof rating. This is the kind of easy-to-install, instant
security solution that customers would really appreciate and offers a potential alternative to the CCTV install. Customers who reject the cost of CCTV could still be protected with lower value security lighting combination units. There is also an opportunity to offer same day installation of these units to provide immediate cover prior to the main CCTV installation. If the customer already has some form of external lighting, the installation of a replacement floodlight camera recording unit can be carried out in minutes. It’s something that installers should seriously consider recommending to their customers and wholesalers can encourage by making sure these solutions are available.
www.espuk.com
Adequate lighting is a key issue for cameras. As LED lighting continues to advance this is a technology that offers a very energy efficient
option. The white light versions also help with achieving a true colour picture at night and the IR versions offer a solution where light pollution is an issue or a more covert system is required.
20 | electrical wholesaler January 2016
www.ewnews.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61