TECHNOLOGY IN ACTION ADVERTORIAL Precision Fluid Dispensing Workstation
Ultimus Vfrom Nordson EFD enables significant productivity increase in assembly processes.
Temperature
Transmitters with THZ3 and TDZ3
These products have Moore Industries’ industry leading durability and reliability combined with several new features that increase usability and functionality including a new dual sensor input. The dual sensor input allows the THZ3 and TDZ3 to offer backup and fail-over protection, with either of the sensors or inputs designated as the primary measurement and the secondary input acting as a backup sensor in case of a primary sensor failure. The
T THZ3 and TDZ3 come with Device
Intelligence, a series of features for smarter control and monitoring including sensor drift and corrosion detection, smart range alarms with four HART alarms, a High Availability option and input simulation capability allowing manual input of a direct or calculated value.
Moore Industries u 01293 514488 u
www.miinet.com/uk
enter 810
he THZ3 and TDZ3 mark the next generation of our Smart HART® temperature transmitters.
• Eliminates variability by removing operator guesswork from the process.
• The amount applied is
determined by a combination of (1) air pressure, (2) dispense time and (3) tip size.
• To make identical dots or fill cavities with consistent volumes of material, the user adjusts air pressure to achieve the desired flow rate and then sets deposit size with the digital timer.
• For fluids that change viscosity, the Ultimus V high-precision dispenser can store and automatically adjust dispensing settings to keep the amount of fluid applied constant.
• Can be mounted on robot to automate the process.
EFD International u 01582 666334
Fanless low power embedded box PC T
u
www.nordson.com enter 811
he BVM Group has introduced the ASRock iBOX-210, a self-contained small form factor (200 x 135 x 39mm) embedded PC that features very low power consumption, fanless operation and high performance. The iBOX-210 is available with either the
E3826, J1900 or N2930 22nm Intel Atom Baytrail System on Chip dual and quad core processors with up to 4GB of DDR3 1333MHz in a single slot. The device supports Linux and Windows 7 and 8 OS. The highly integrated Baytrail SoC provides a powerful computing engine for applications where high resolution display or image capture is required.
BVM Ltd u 01489 780144 u
www.bvm-store.com enter 812
BM, a market leader in the field of test and measurement, is pleased to announce the updated and improved version of its Common Application Programming Interface (API), which offers users one programmable environment for several data acquisition systems. Version 2.0, which is suitable for integrating QuantumX, PMX and MGCplus into NET based software, enables automatic alignment from several devices, which in turn provides clear and concise results in a structured and intuitive layout, minimising the possibility of interpreting errors. Customers using different acquisition systems from HBM can now also save time, as general commands, such as device scan, channel selection and measuring, are the same for all systems, so that no re-programming of these components is required when changing over to the new hardware.
HBM United Kingdom Ltd u 0208 515 6000
HBM introduces updated version of common API H
Pumping Corrosive and Abrasive Liquids at Achema 2015
on Stand L53 Hall 8 with the theme: “Hydra-Cell seal-less pump technology… Its different”. The unique and advantageous differences will be highlighted in product displays,
W
anner International will display its full range of Hydra-Cell diaphragm pumps at Achema 2015
working
demonstrations and cutaway pump models. Compact in size, Hydra-Cell pumps have a seal- less design that eliminates leaks, hazards and the expense associated with replacing dynamic rotary seals and packing. They can operate with a closed or blocked suction line and run dry indefinitely without damage, eliminating downtime and associated repair costs.
API 674 configurations of Hydra-Cell pumps are
also available as are versions with ATEX Cat 2 Zone 1 & Cat 3 Zone compliance. The Hydra-Cell metering and dosing range will also be featured, with focus on the electronic and mechanical adjustment control options now available. The unique,
high efficiency multi-diaphragm
design is claimed to handle abrasives with less wear than gear, screw or plunger pumps.
u
www.hbm.com /AUTOMATION enter 813
Wanner International u 01252 816847 u
www.wannerint.com
enter 814 MAY 2015 |AUTOMATION 43
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52