TECHNOLOGY IN ACTION
Advertorial Ultimate Field
Deployable Shielded Cat 6A Cable
elden Inc., a global leader in signal transmission solutions for mission-critical applications, has introduced a range of rugged high performance shielded Cat 6A cables for use in studios or in tactical field deployable audio/data installations. Designed as the ultimate field deployable product, these exceptionally robust cables can be used in the harshest of environments,
B yet deliver reliable
performance for maximum uptime. Belden CatSnake Cat 6A tested cables deliver superior performance thanks to the 100% coverage of the pairs as these are individually shielded with Beldfoil aluminium/polyester foil and an overall braided shield. The new Belden CatSnake Cat 6A cables are extremely robust and have exceptional flexibility and flex life. This makes them ideal for use in high traffic areas, such as in broadcast studios or in any type of tactical, field deployable audio/data installation.
Belden Tel: 0161 4983749 Web:
www.beldensolutions.com
enter 804
CHURTER now offers two appliance inlets in splash-water proofed versions. The appliance inlet 6100-3 with a sealing kit has a protection degree of IP 54, both into the equipment and to the cord connector. The 5707 power entry module with line filter offers IP 65 protection into the equipment as a standard feature. With the optional sealing kit, the coupling to the cable connector is additionally protected to IP 54.
For applications in environments where there is splashing water, SCHURTER offers the two connector types 6100 and 5707 in an newly optional version with a sealing kit which guarantees IP 54 to the cord connectors.
The compact power entry module 5707 contains an appliance inlet C14, fuse holders and either a standard or medical line filter. As a standard feature it is rated to protection class IP 65 into the equipment and thus provides a tight seal against dust and splashes. The component provides seals at the assembly opening, at the screws, the fuse holders and between the connector pins and the connector housing.
With the new additional gasket in the appliance inlet, type 5707 is rated for IP 54 protection between the inlet and the cord connector when it is plugged in. The power entry module is particularly well suited for medical equipment that must routinely be cleaned and disinfected. This includes equipment such as diagnosis, dialysis and infusion units. It is also ideal for commercial applications, for example in beverage machines.
The C14 inlet type 6100-3 is also available with a sealing kit for a protection degree of IP 54 for both into the device as well as the coupling to the cable connector. This is suited for equipment used in outdoor applications, for vehicle charging units, for vehicle diagnostics as well as for ultrasound cleaning or stirring equipment in the laboratories.
Independent testing laboratories have examined and confirmed the reliability of the new sealing kits according to IEC 60529. To ensure the tightness of IP 54 with these sealed versions in actual use, the safety bracket (included in the kit) has to be applied to secure the cord set to the equipment.
SCHURTER Ltd Tel: 01243 810 810
The Newland Atomiser creates sprays of fine droplets without any pressure on the input liquid
Some applications: • moisturisation • disinfection • evaporative cooling • odourising/de-odourising • emulsification • aeroponics.
The Newland Atomiser is a high-speed electric motor rotating a small porous cylinder, from which the liquid is emitted by centrifugal force, sheared into fine, equally-sized droplets.
• no high pressure or compressed air needed
• low power consumption (24 Volts DC, 2 Amps max.)
• droplets near equal-sized (adjusted by motor speed)
• low-impact spray cloud.
See the video at
www.newlanddesign.com. Evaluation units are always available for trial.
Newland Design Ltd. Tel: 01524 733424 Web:
www.newlanddesign.com
Design Solutions OCTOBER 2013 enter 806
his unique range of robust, sealed enclosures are tough enough to withstand harsh weather conditions, with a temperature rating of –20ºC to +85ºC.
T Dust and waterproof for short term
submersion to 1m depth, this versatile range of enclosures has integrated moulded seals and threaded knock-outs that can be pushed out for use with M20 size cable glands. The captive lid screws are corrosion resistant plastic for increased torque and insulation. They are sealed up to IP67, flame retardant ABS UL94-HB and with 4 x PCB M3 self-tapping mounting feet.
Complete with 2 x M20 threaded
and 1 x M20 non-threaded knockouts, plus 8 x vertical PCB mounting slots. They are available in black or grey, with the option of a transparent lid. Accessories include cable glands, flange wall brackets and DIN rail brackets.
Evatron Plastic Enclosures Ltd Tel: 01908 675121 Web:
www.evatron.com
enter 807 47
Robust IP67 Enclosures
Web:
www.schurter.co.uk enter 805
5707 and 6100: Splash-water proofed IEC appliance inlets S
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60