ProductPreviews
Powerful Horizontal Machining Center HU63EX horizontal machining center boosts metalworking produc-
tivity through a combination of precision, power and torque. The 17,000-kg machine has a footprint of 2900 × 3180 mm with X, Y and Z axes travels of 900, 800 and 800 mm, respectively. The machine offers X, Y and Z-axis positioning and repeatability accuracy of ±0.001 mm and B axis (rotating the 630-mm square pallet) and accuracy of ±2 second with repeatability ±1 second. The machine’s standard 50-taper, 6000-rpm spindle offers 18.5/15 kW (30 min/ continuous, 24.7/20 hp) power with 601 N•m torque, delivered through a two-step gearbox. Optional spindles, a three-step gearbox, and an integral built-in motor are available. The machine’s structure maximizes rigidity and accuracy with a bed that is a single casting supported at three points and specially developed rib configuration. Mitsui Seiki USA Inc. Ph: 201-337-1300 Web site:
www.mitsuiseiki.com
Helical Milling Cutter
HeliqMill 390 line of helical milling cutters offers a triangular insert with three cutting edges—with 10 and 15-mm cutting edge lengths the same lengths as an insert with two edges. The new insert with three edges has a stronger structure, and its clamping into the pocket features high rigidity. The advanced cutting geometry of the new insert results in a precise 90° shoulder. A wiper flat provides
excellent surface finish. The new tools are intended for machin- ing shoulders, slots and planes. In addition, they can be a good choice in milling surfaces, ramping-down or helical interpola- tion such as pockets or cavities. The tools are available as end mills with shanks and face mills with a central bore. Inserts are produced from Sumo Tec carbide grades. Iscar Metals
Ph: 817-258-3200 Web site:
www.iscar.com
Low-Cost, High-End CMM
EasyScope CMM features a high-end image processor optical system in a low-cost machine. The image processor system
evaluates all pixels in the field of view, enabling filtering and image enhance- ment that goes far beyond the limita- tions of the old edge detector optics. Low-contrast parts
can be measured consistently, eliminating the problem of un- reliable measuring programs due to variations in part surface reflectivity. Measuring range of the EasyScope is 200 × 150 × 150 mm. WinWerth software features teach mode and is easy to use and powerful with DMIS language in the background. Werth Inc.
Ph: 860-399-2445 Web site:
www.werthinc.com
Live Tool-Speed Multipliers Line of 1:4 live tool-speed multipliers in 24,000-rpm maximum styles is avail- able for all popular live tool lathes currently on the market. These speed multipliers are provided as axial or radial drilling and
July 2013 |
ManufacturingEngineeringMedia.com 95
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108