Manufacturing Systems for Precision Metal Components More productive
The high drive rating (15 kW) at the grinding wheels ensures short ma- chining times. In addition, all circular grinding opera- tions can be completed in a single clamping operati- on if two or three grinding wheels are used.
Safer
The initial balancing pro- cess is carried out with gap and crash detection. In addition, process control benefi ts from in-process measurements (external diameter and longitudinal positioning) on the compo- nent shoulders.
More precise
Absolute measuring system (glass scales) ensures maximum machining accuracy. This is supplemented by high precision, rigid linear roller guides in all axes.
BUNDLED GRINDING COMPETENCE
HG 2 HORIZONTAL CIRCULAR GRINDER
Maximum Quality comes Standard
Nowhere is quality, precision and process reliability more important than in circular grinding. The HG 2 stands out in this respect.
Perfect circular grinding is a matter of a few microme- ters. The high precision process must run 100 % safely and effi ciently even in mass production. The HG 2 circular grinder is designed to ensure this aspect. It has a high drive rating at the grinding wheel to ensure extremely short machining times. In addition, the high precision roller guide in the axes and the thoroughly rigid construc- tion ensure particularly high machining quality. And of course the entire process is monitored perfectly.
Conclusion: grinding quality comes standard, the HG 2 with its wide range of high tech components is a giant leap forward in terms of performance.
The HG 2 at a glance: » Short machining times due to high grinding wheel drive rating
» Balancing operation with gap and crash detection to monitor the process
» In-process measurement of external diameter and longitudinal position on the shoulders
» High precision, rigid linear roller guides in all axes
» Absolute measuring system (glass scales) in all axes ensures maximum machining accuracy
Workpiece diameter max.: 7.9 in Workpiece length max.: 15.7 in X-axis travel: Z-axis travel:
14.2 in 39.4 in
8
» NC tailstock with large stroke for easy retooling » High productivity due to short idle times » User-friendly workpiece correction system » Very simple handling with control and setup masks » Large doors and low distance to workpiece
Whether for small crankshafts or a 20 feet crankshaft for shipbuilding, EMAG develops customized machining solutions.
HIGH PRECISION: DIFFERENT SHAFTS CAN BE MACHINED ON THE HG 2
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148 |
Page 149 |
Page 150