available with internal coolant holes. The system allows ma- chine shops to quickly, easily and accurately switch between various operations such as cutter type, radius variation, teeth
hinges left and rests at a 30° angle above the headstock, making it easy to change the chuck or workpiece. The operator does not need to reach over the chuck to move the shield in and out of position. The front portion of the shield
frequency, geometry and grade. CoroMill 316 end mills are even suitable for five-axis milling of flanks which often require tapered tools for stability at longer tool reach. Sandvik Coromant Ph: 800-726-3845 Web site:
www.sandvik.coromant.com/us
Crimp Connection
Mechanical Crimp Connection (MCC) eliminates welding and is said to ensure a reliable, leak-free connection. MCC con- sists of a one-piece crimp adapter with a specially designed bite ring and internal sealing. When crimped, the bite ring attaches to the pipe and secures the adapter. Internal seals in the MCC adapter ensure a leak-free connection and protect against ingression. The device achieves NPS pipe connec- tions in the most common weld sizes, ranging from 1 to 2" (25.4–50.8 mm). It provides a working pressure capability of nearly 5000 psi (34.5 MPa) for many applications. Parker Hannifin Corp. Ph: 800-272-7537 Web site:
www.parker.com
Lathe Chuck Shields
Heavy-duty steel chuck shields designed for lathes or similar machines serve two basic functions: they provide a safe- guard between individuals and point-of-operation or rotating hazards; and they protect individuals from flying chips, sparks, coolant, lubricant, and other particles. The shield
can also be hinged up to change the workpiece. These shields comply with OSHA 29 CFR 1910.212 and the ANSI B11.6 safety standard for lathes. Danray Products LLC Ph: 866-482-6807
E-mail:
ryan.ebens@danrayproducts.com Web site:
www.danrayproducts.com
Wheel Cell
New wheel cell is designed to enable wheel manufactur- ers to increase productivity and efficiency while minimizing downtime. It includes the new MB-56VA-AW aluminum wheel drilling machine as well as two Okuma CNC lathes in a choice
of sizes, a FANUC robot, and a variety of conveyance options, allowing for a customized cell configuration. All three Okuma machines feature THINC-OSP open architecture CNC control. The MB-56VA-AW is based on Okuma’s VMC. Its high-speed trunion table provides full four-axis machining. Gosiger Auto-
April 2013 |
ManufacturingEngineeringMedia.com 101
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148 |
Page 149 |
Page 150