This page contains a Flash digital edition of a book.
Product Previews


Aerospace Water-Soluble Coolant Quakercool 7000 ALF BAF is a water- soluble coolant that features new boron-free and amine-free technol- ogy for machining aluminum alloys. Historically used in Europe, the metalworking fluid has been adapted to be compliant with the US Toxic Substance Control Act (TSCA) while maintaining its global availability. The coolant has low alkalinity properties that aid in the prevention of staining aluminum. It has tested successfully for machining a large cross section of aerospace aluminum alloys, and has also passed a customer’s stain test- ing on a classified alloy. The product provides excellent wetting abilities, resulting in high cutting performance, microbiological growth control without biocide addition, and with good de- tergency provides cleanliness on tools and machines.


Quaker Chemical Corp. Ph: 610-832-4000 Web site: www.quakerchem.com


Magnetic Ring Encoder Leine & Linde‘s MRI 2000 magnetic ring encoder is segmented to easily fit around large shafts where increasing output power and reducing weight are a challenge for large machinery OEMs and others like wind turbine users. A current trend is to use permanent magnet generators to exclude the gearbox and thus decrease the total weight. These solutions often require a velocity feedback encoder mounted on the main shaft between the generator and the rotor blades where the shaft dimension is large--sometimes around a meter. The MRI 2000 ring encoder is segmented into pieces that can be mounted from two sides of the shaft and screwed together through flange mounting with axial screws or using Leine & Linde’s ClampFit solution. The speed pickup unit is available with


several market standard interfaces for incremental signals. Heidenhain Corp. Ph: 847-519-4702 Web site: www.heidenhain.com


Low-Mode Ytterbium Fiber Laser


New generation of Kilowatt class low- mode Ytterbium fiber lasers, the YLS- xxx-Y13 series, offers lower operating costs and service requirements than IPG’s current best-in-class lasers. The main benefits include increased wall plug efficiency (up to 33% from 28 to 30%), up to two times average improve- ment in beam quality and an increase in the estimated mean time of uninter- rupted laser operation from the current one and one-half years to greater than three years. This series comes with a three-year warranty, an upgrade from the current two-year warranty. IPG Photonics Corp.


E-mail: bshiner@ipgphotonics.com Web site: www.ipgphotonics.com


TO PLACE:


Employment, service, new and used equipment, rebuilding, parts & service, scrap metal, agents, business listings, consultants and general admission.


CONTACT:


Marcus Abdullah One SME Drive P.O. Box 930


Dearborn, Michigan 48121-0930 Phone: (313) 425-3262 Email: mabdullah@sme.org Email: advertising@sme.org


RATES:


Line Ad. Per line $35 (minimum 5 lines, 7 words per line avg.) No agency commission.


Display ad per inch: 1x: $195 6x: $180 12x: $165 (maximum 2")


Color available, please inquire. No agency commission. Display Ad Units.


(Same as publications rates) Agency commission allowed to recognized agencies.


Payment in advance on all listings. 108 ManufacturingEngineeringMedia.com | April 2013


Your Ad Here


call Marcus Abdullah at 313-425-3262


CLASSIFIEDS POSITIONS AVAILABLE


Orograin Bakeries Manufacturing Inc. has an opening for Sr. Mgr of Process Excellence in Horsham, PA to develop, improve, implement & evaluate integrated systems. Requires BS + 5 yrs exp. in manufacturing or industrial engineering & 50% domestic travel. Submit resumes at http://careers.bimbobakeriesusa.com/career.cfm using Requisition#8572. EOE


PRODUCTS/SERVICES


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124  |  Page 125  |  Page 126  |  Page 127  |  Page 128  |  Page 129  |  Page 130  |  Page 131  |  Page 132  |  Page 133  |  Page 134  |  Page 135  |  Page 136  |  Page 137  |  Page 138  |  Page 139  |  Page 140  |  Page 141  |  Page 142  |  Page 143  |  Page 144  |  Page 145  |  Page 146  |  Page 147  |  Page 148  |  Page 149  |  Page 150