Product Previews
international standards including AGMA 2000-A88, DIN 3962, JIS B 1702 and ISO 1328. Hexagon Metrology Ph: 847-214-5234 Web site:
www.hexagonmetrology.us
Two Laser Marking Systems Two new Fusion laser series expand with upgraded motion control system for increased engraving and cutting speed and vector edges. The Fusion CO2
system is designed for
engraving and cutting on a variety of materials. The FiberMark Fusion system is designed for more industrial applications on bare metals and engineered plastics. Both new laser systems
Steel Turning Inserts Tiger∙tec Silver Turning inserts consists of three new grades and four new geometries for longer tool life, faster cycle times and process reliability in machining unalloyed and alloy steel, cast steel, stainless, ferritic and martensitic steel, as well as ductile cast iron. CVD coating in combination with geom-
marking. The NO-GO side is clearly marked with a red ring. Thread gages accommodate 2B, 3B (inch) and 6H (metric) classes of fit and a full range of stocked gages are available inch and metric in coarse and fine, UNC, UNF, UNS and NPT. Sizes range from 1-64 to ¾-10 for inch and M1.6 to M22x1 in metric. Emuge Corp. Ph: 508-595-3620 Web site:
www.emuge.com
include a 32 × 20" (813 × 508-mm) engraving table and motion control systems that allow higher speed processing, including flame-polished edges on acrylic and 150% speed increases in cutting thin woods and acrylics. Features include joystick control to raise and lower tables easily, temperature sensor/e stop button for safety, and large tempered glass and LED lighting for better viewing of work area while engraving. Epilog Laser
Ph: 303-277-1188 Web site:
www.epiloglaser.com
Thread Gage Line
Line of precision fixed limit GO/NO-GO plug thread gages are manufactured to ANSI/ASME B1.2 (Unified Inch) and ANSI/ASME B1.16M (Metric M) standards. Thread gages inspect the pitch diameter and functional thread for internal-threaded components. The GO and NO-GO sides are each mount- ed on the one gage knurled handle. Each handle is clearly identified with the size and Emuge ID number for traceability with room for custom laser
100
ManufacturingEngineeringMedia.com | April 2013
etries and universal chipbreakers can increase steel turning productivity up to 75%. Substrate for these indexable inserts is a micro-structured aluminium oxide that can raise tool life in the event of crater wear by 50%. In addition, an optimized cutting edge preparation process called Microedge Technol- ogy reduces cracks, micro-chipping and breakage, boosting process reliability in high-volume production. Grades include WPP10S (ISO P10), WPP20S (ISO P20) and WPP30S (ISO P30). Four previously introduced geometries have been devel- oped in parallel within the Tiger∙tec Silver Turning family: FP5, MP3, MP5 and RP5. Walter USA LLC Ph: 800-945-5554 Web site:
www.walter-tools.com/us
Milling System
The CoroMill 316 exchangeable-head milling system is well suited to high-feed face milling, slot milling, helical interpo- lation, shoulder milling, profile milling and chamfer milling of components in material groups from ISO P to ISO S. It is
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148 |
Page 149 |
Page 150