CORE REMOVAL TOOLS ACCESSORIES and REPLACEMENT PARTS
CD3910
Shrader cores without loss of charge. Has 1/4” male flare side port. A CD2245 brass cap is included.
CD3900
port. Works with all accessories.
CD3930
side port.
CD3916 CD3915
CD3916 thread chaser and CD3915 pick. The thread chaser cleans and aligns the internal threads of an access fitting. Pick extracts broken core from housings without loss of refrigerant. Has left hand threads.
CD3975
head, on-off switch, hold-test switch and spare battery. Temperature Range: -58° - +302°F. For use with CD3910 and CD3930 access tool.
CAT. NO. MFG. NO. EACH 9R1038 9R1037 4G3179 9R1039 9R1044
These parts simply make connections between equipment with unlike threads. The CD1 series couplers start with 1/4” male flare access and end with pipe or SAE/ODF connections.
The CD2 series couplers start with a 1/4” female flare swivel and end with different flare sizes, pipe threads and Acme threads. The adapters made from hex stock are for permanent installations.
on MPT end.
and flare nut included, no cap.
flare access. Depressor tip and seal, no valve core.
flare access. 90Þ configuration. Depressor tip and seal, no valve core.
threads. Depressor tip and seal.
flare. Depressor tip and seal.
“SURE SEAL” RETAINING COUPLERS
When attached to an access fitting, the “Sure Seal” Retaining Coupler automatically opens and depresses the valve core all in one action.
When disconnected, it traps refrigerant in the charging hose. Leave it permanently installed on the end of the hose. The seals are com- patible with newer refrigerants.
1/4” male flare.