provide relief from high frequency vibrations such as transformer and motor hum.
and refrigeration compressors.They are often used under machines to provide friction and eliminate the need for bolting.
NEOPRENE VIBRATION ISOLATION HANGERS FOR WIRED CEILING SUSPENSION
should be part of the system. Loops are provided on each end to pass the wire through.
Also useful for reducing noise from residential piping and duct work.
SPRING MOUNT VIBRATION ISOLATORS
Steel springs reduce vibration transmission most efficiently as performance improves with larger deflections. Minimum deflection
Spring deflections are 2 - 6 times higher than the rubber products. Sponge rubber guides improve stability. Use the holes to bolt to Select mountings based on weight distribution.
TYPE & SIZE CAPACITY RANGE (lbs)
CA CA CA CA
35-75 76-125
130-200 230-310
DEFLECTION RANGE (inches) 0.75 -1.50 0.75-1.33 0.75-1.15 0.75-1.00
SPRING COLOR
Orange Brown Black Yellow
A L W H T SW HCL HCW MA BOLT MBD
4 5-3/4 2-1/8 4-1/2 1/2 5/16 4-3/4 1 1/4
SEC BOLT DIA. & LENGTH (inches)
5 3/8 x 4
TYPE & SIZE CAPACITY RANGE (lbs)
WHR WHR
Up to 60 60-15
DEFLECTION RANGE (inches) 0.20 0.20
COLOR MARK
Green White
NEOPRENE VIBRATION ISOLATION HANGERS
An excellent general purpose double deflection neoprene hanger for ceiling suspended me- chanical equipment and piping. These hangers are most effective for reducing noise transmis- sion and vibration from equipment running above 1000 rpm.
2-1/2 x 1-7/8 x 1-3/4 2-3/4 x 2-1/4 x 2” 2-1/4 x 2-1/4 x 2” 2-1/4 x 2-1/4 x 2”
4-1/2 x 4-1/4 x 3-1/4” 4-1/2 x 4-1/4 x 3-1/4”
2-1/4 2-1/4 2-3/4 2-3/4 3 3
3/8 1/2 1/2 1/2 3/4 3/4
$31.00
$35.65 $35.65
146
The Mason Industries products shown above are not stocked at R.E. Michel locations but are available upon special order. Please contact your local R.E. Michel branch or sales representative for pricing and additional information.