Designed to protect the compressor from liquid re- turn. The suction line may trap/accumulate quanti- ties of liquid which are suddenly dumped on the compressor as it starts up, resulting in compressor failure. Proper use of a suction line accumulator installed in the suction line, prior to the compres- sor will eliminate this possibility. Vertical accumu- lators feature copper nipples and fusible plug.
CAT. NO. MFG. NO. TONNAGE RANGE 1/4 to 2 1/4 to 2
3R615 3R616
3701 3702
4G9304 HP3702 1/4 to 2 4G8589 HP3703 1/4 to 3 3R617 3R618
3703 3738
3700 3706
4G9305 HP3738 1 to 4 3R619 3R620
1 to 9 2 to 17
1/4 to 3 1 to 4
SUCT. LINE SIZE
DIMENSIONS LENGTH x DIA.
5/8” I.D. 6-5/8 x 4” 5/8” I.D. 10-5/8 x 4” 5/8” I.D. 10-5/8 x 4” 3/4” I.D. 10-5/8 x 4” 3/4” I.D. 10-5/8 x 4” 7/8” I.D. 13 x 5” 7/8” I.D. 13 x 5” 1-1/8” I.D. 15 x 6”
Designed to provide a maximum of heat transfer efficiency with a minimum of pressure drop. They are conservatively rated in horse- power and therefore easy to select for a particular application.
Installation is simplified as connections are of proper size to match suction and liquid lines of standard units. Installation is neat as fit- tings are in the end caps and lines remain parallel.
Designed to store liquid refrigerant on systems utilizing TXV’s. this is a vertical receiver with 430F fusible plug.
CAT. NO. MFG. NO. CONNECTION SAE PUMP DOWN DIMENSIONS DIA. x LENGTH 5” x 10”
10R3455 1918 1/4” 6 lbs
Designed to reduce pulsation and vibration of refrigerant thru the discharge line. The discharge muffler smoothes out the pulsation and reduces the associated noise in the space.
10R3478 M5
CAT. NO. MFG. NO. CONNECTION OD MAX TONS DIMENSIONS DIA. x LENGTH 2” x 7-7/16”
5/8” 5 EACH $67.18
ANGLE CHARGING & PURGING VALVES
Designed for installation in branch or run of solder type tee to provide convenient system access for charging and purging. Compact design forged brass body. Cap and chain included. Rated up to 700 psi.
Eliminates vibration and dampens noise on air condition- ing and refrigeration equipment. Constructed of seamless, heavy duty metal hose covered with a high tensile bronze braid. Each unit is pressure tested, thoroughly cleaned and highly polished. They are electronically dehydrated, ends sealed with plastic caps and individually boxed. UL listed.
CAT. NO. SIZE OVERALL LENGTH
3/8” OD 8-1/4” 1/2” OD 9”
5/8” OD 9-3/4” EACH
$22.86 $25.94 $26.24
3/4” OD 11-1/4” $24.59 7/8” OD 11-1/2” $40.36
CAT. NO. SIZE OVERALL LENGTH
3R586 3R587 3R588 3R589 3R590
1-1/8” OD 13” EACH $48.89
1-3/8” OD 14-3/4” $70.51 1-5/8” OD 17” 2-1/8” OD 20” 2-5/8” OD 24”