1/8” x close $3.20 1/8” x 1-1/2” $1.17 1/8” x 2” $3.27 1/8” x 3” $3.04 1/4” x close $3.18 1/4” x 1-1/2” $2.11 1/4” x 2” $4.23 1/4” x 3” $2.90 3/8” x close $3.32 3/8” x 1-1/2” $3.94 3/8” x 2” $2.70 3/8” x 3” $3.59
1/2” x close $2.05 1/2” x 1-1/2” $5.21 1/2” x 2” $6.14 1/2 x 2-1/2” $3.99 1/2” x 3” $8.45 1/2” x 3-1/2” $5.27 1/2” x 4” $10.87 1/2” x 4-1/2” $5.59 1/2” x 5” $7.28 1/2” x 6” $17.02
CAT. NO. PIPE SIZE EACH 5K716
3/4” x close $6.32
4G8170 3/4” x 1” $4.24 4G9426 3/4” x 1-1/2” $4.51 7G673 7G672 7G670 5K717 5K802 5K803 5K804 5K805 5K806
4G9379 1” x close $6.16 3Q999Q 1” x 2” 5K807 5K808
1” x 3” 1” x 6”
3Q999R 1-1/4” x close
5K809 5K810 5K811 5K812
1-1/4” x 3” $19.15 1-1/4” x 6” $36.79 1-1/2” x 3” $24.12 1-1/2” x 6” $46.42
3/4” x 2” $7.93 3/4” x 2-1/2” $5.07 3/4” x 3-1/2” $6.72 3/4” x 3” $10.62 3/4” x 4” $13.84 3/4 x 4-1/2” $8.49 3/4” x 5” $7.20 3/4 x 5-1/2” $10.22 3/4” x 6” $19.76
$13.73 $26.39
REDUCING COUPLINGS
CAT. NO. PIPE SIZE EACH 5K897 5K899 5K900
3/8” x 1/4” $2.41 1/2” x 3/8” $4.06 3/4” x 1/2” $9.38
ADAPTERS
CAT. NO. PIPE SIZE EACH 5K903 5K904 5K905
1/4” x 1/8” $1.53 3/8” x 1/4” $2.70 1/2” x 3/8” $4.28
REDUCING NIPPLES
CAT. NO. PIPE SIZE EACH 5K910 5K911 5K912
1/4” x 1/8” $1.33 3/8” x 1/4” $1.25 1/2” x 3/8” $3.49
CAT. NO. PIPE SIZE EACH 5K754 5K755 5K756 5K757
90° ELBOWS 1/8”
4G9477 3Q999P
1/4” 3/8” 1/2” 3/4” 1”
$5.11 $4.75 $6.48
$10.18 $24.89
90° STREET ELBOWS 1/8”
CAT. NO. PIPE SIZE EACH 5K663 5K666 5K664 5K667 5K665
1/2” 1/4” 3/4” 3/8”
CAT. NO. PIPE SIZE EACH 5K913
UNIONS 1/2” FPT
3Q999N 534 1” FPT
$5.20 $6.66 $7.15 $9.45 $3.76
CAT. NO. PIPE SIZE EACH 7K758 7K759 7K760 7K761
CROSSES 1/4”
3/8” 1/2” 3/4”
$6.48 $8.16
$11.67 $18.22
BARBED BRASS FITTINGS CAT. NO. DESCRIPTION
5K1100 3/8” Coupling 5K1102 3/8” Tee
EACH $1.72 $7.13
5K1103 3/8” Male Flare Adapter $3.60 5K1105 3/8” Female Adapter $4.04 5K1101 3/8” Male Adapter
$2.09 5K1104 3/8” 90Þ Male Elbow $5.25 BARBED
CAT. NO. PIPE SIZE 5K1102P
PLASTIC FITTING EACH
3/8” Barbed x 3/4” MPT $0.98
$3.43 $6.60 $6.54
$12.60 $19.68
LONG LINE
REQUIREMENTS ON A/C OR HEAT PUMP INSTALLATIONS
We frequently receive requests regarding the requirements for line sets over 50 feet in length. We recommend finding alternative locations for the indoor and outdoor units that require 50 feet or less of connecting lines. If this isn’t possible, we are faced with a number of considerations to accomodate the “long line requirement” such as:
1. Additional oil & refrigerant may be needed.
2. Additional suction line traps may be required.
3. Crankcase heaters must be considered.
4. Accumulators may be required.
5. Solenoid valves may be required.
6. Start kits are required. 7. TXV and or orifices may need to be resized.
8. Suction and liquid line sizes may change.
Failure to calculate the requirements and add the correct components will result in system failure. We have “long line” calculation recommendations from which our customers can calculate the requirements and correctly install “long lines”.
“Long line calculation” sheets are available from your local R.E.Michel Branch, or Sales Representative.