JET
New Flap Discs which give a great feeling of speed. Due to dual technology of high performance material on one side with air cooling on the other, speed and performance are not compromised, no wonder they are branded JET. The Flap Discs are
New Disc
With the New Evolution AS 60 W an extra thin cutting disc especially for stainless steel is now available in Dronco quality. The new 0.8mm thin disc is characterised by an excellent cutting performance which is fast, smooth cutting, low contact pressure with limited sparking giving the end result of low-burr cutting edges.
With this new extra thin cutting
disc, Dronco’s research and development department presents a tool of excellent quality with a high performance that underlines the demand for the priority of quality before speed of development. Another advantage of the AS 60 W is the delivery of these thin cutting discs in Dronco-exclusive Lifetime Plus Tins. With this the user is always guaranteed to have fresh and efficient
tools. Especially for every thin standard cutting disc, a natural aging process due to unsealed storage is particularly serious. Tests have shown that after only six weeks the service time of the thin cutting discs reduces by an average of 30%. The reason for this is the absorption of humidity from the air.
Multi Discs The range of multi talents has also expanded: The cutting disc ACS 46T Multi cuts steel, stainless steel, stone and is exceptional on wall tiles with an excellent cutting performance. With these qualities it is the ideal tool for the plumbing trade, this fast disc is also suitable for other trades and application areas. Now this disc is also available in diameters 180mm and 230mm.
designed for use on an angle grinder and equipped with lamellas made of special high quality felt. The new G-VA Finish completes the range of three different polishing flap discs for the angle grinder.
This new programme that now gives four polishing flap discs in the various grades enables the complete process from the working on rough surfaces graduating up to the mirror finish.
characterised by a solid base made of reinforced glass fibre plastic backing. The cooling slots integrated into the backing provide cooling of the flap disc and the work piece during operation with its quick change integrated M14 adaptor giving a fast change so less down time. The JET flap discs are offered in two types, JET-AZA with grinding lamellas produced in Zirconium Corundum with a backing material of cotton polyester. JET-AK with grinding lamellas with ceramic grain on a polyester backing.
Ultimate Addition
With the new polishing flap disc G-VA Finish, Dronco completes its range of the
necessary polishing flap discs which now covers the whole spectrum for the processing of surfaces up to a mirror finish. The gloss polishing flap disc is
Dronco - a member of oSa Dronco Abrasives UK Ltd Tel: 0161 874 2600 Fax: 0161 874 2609
Email:
sales@droncoabrasives.co.uk Reply No. 207
telephone 01444 440188 ToolBUSINESS+HIRE 11
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32