8


nanotimes Research


10-09 :: September 2010


Robotics // Engineers Make Artificial Skin Out of Nanowires


E


ngineers at UC Berkeley, USA, have developed a pressure-sensitive electronic material from


semiconductor nanowires that could one day give new meaning to the term “thin-skinned.” The UC Berkeley researchers present in Nature Materials a nanowire active-matrix circuitry for low-voltage macroscale artificial skin.


“The idea is to have a material that functions like the human skin, which means incorporating the ability to feel and touch objects,” said Prof. Ali Javey, associ- ate professor of electrical engineering and computer sciences and head of the UC Berkeley research team developing the artificial skin.


Ali Javey and his team demonstrate macroscale (7x7 cm2


) integration of parallel nanowires arrays as


the active-matrix backplane of a flexible pressure- sensor array (18x19 pixels). The integrated sensor array effectively functions as an artificial electronic skin, capable of monitoring applied pressure pro- files with high spatial resolution. The active-matrix circuitry operates at a low operating voltage of less than 5 V and exhibits superb mechanical robustness and reliability, without performance degradation on bending to small radii of curvature (2.5 mm) for over 2,000 bending cycles. It is the first such material made out of inorganic single crystalline semiconduc- tors.


“Humans generally know how to hold a fragile egg without breaking it,” said Javey, who is also a mem- ber of the Berkeley Sensor and Actuator Center and a faculty scientist at the Lawrence Berkeley National Laboratory Materials Sciences Division. “If we ever wanted a robot that could unload the dishes, for in- stance, we’d want to make sure it doesn’t break the wine glasses in the process. But we’d also want the robot to be able to grip a stock pot without dropping it.”


Previous attempts to develop an artificial skin relied upon organic materials because they are flexible and easier to process.


“The problem is that organic materials are poor se- miconductors, which means electronic devices made out of them would often require high voltages to operate the circuitry,” said Javey. “Inorganic mate- rials, such as crystalline silicon, on the other hand, have excellent electrical properties and can operate on low power. They are also more chemically stable. But historically, they have been inflexible and easy to crack. In this regard, works by various groups, including ours, have recently shown that miniatu- rized strips or wires of inorganics can be made highly flexible – ideal for high performance, mechanically bendable electronics and sensors.”


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81