10-09 :: September 2010
nanotimes News in Brief
CEA-Leti said that a prototype of the new-genera- tion scalar magnetometer, which it designed and developed in partnership with CNES, has passed the qualification step en route to being deployed in the SWARM space mission.
SWARM, a project of the European Space Agency, is scheduled for launch in 2011 or 2012. The mission’s objective is to provide the best-ever sur- vey of the Earth’s magnetic field and its temporal evolution, and gain new insights that will improve scientists’ understanding of the Earth’s interior and climate.
The new absolute scalar magnetometers (ASM) are designed to overcome the limits of the nuclear magnetic resonance (NMR) magnetometers, the first magnetometers designed to be placed in orbit. Those instruments, which were used in the Oersted mission launched in 1999 and the CHAMP mission launched in 2000, also were developed by Leti in partnership with CNES.
Furthermore, CEA-Leti and CMP (Circuits Multi Projets®
) announced during the FDSOI Workshop
at Tokyo University the launch of an Exploratory MPW (Multi Project Wafers) initiative based on FDSOI (Fully Depleted SOI) 20nm process, opening the access of its 300mm infrastructure to the design community. This MPW offer is partly supported by EUROSOI+ network that gathers the main Europe- an academic partners on SOI.
http://www.leti.fr
61
The Fraunhofer Institute for Microelectronic Cir- cuits and Systems IMS in Duisburg has developed a CMOS (complementary metal oxide semiconduc- tor) image sensor for an industrial customer which can withstand temperatures ranging from -40 to +115° Celsius (-40° F to 239° F). The CCD (char- ged coupled device) image sensors available up to now fail when the temperature goes beyond about 60 degrees. “Our chip is not only heat-resistant, it even functions at arctic temperatures,” says Werner Brockherde, head of department at the IMS.
The research scientists have succeeded in develo- ping pixels which exhibit an extremely low dark current. This reduction of residual current, which flows in complete darkness, makes it possible to capture very high-quality images even in extreme heat. “It was not easy to achieve a low dark current. An increase in temperature of just eight degrees doubles the dark current, resulting in image noise and reduced dynamics. Ghosting occurs in the form of artifacts or fuzziness and degrades the image,” explains Brockherde. A further special feature of the sensor is its image size of 2.5 x 2.5 centimeters. This offers the advantage that for special applications with weak illumination or for capturing images in the infrared or UV range the sensor can be con- nected directly to an electronic image intensifier. The sensor has a resolution of 256 x 256 pixels. Its high dynamic range or exposure latitude of 90 decibels provides increased contrast and optimized detail accuracy both in shadow as well as in very bright areas. Nuances of light are precisely repro- duced. Thanks to its efficient light absorption, the image sensor reacts with high sensitivity even in weak light conditions. It is therefore also suitable for night vision equipment.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81