70
nanotimes EU-Projects
“The adjacent bone bears hardly any load any more, and even deteriorates in the worst case. Then the implant becomes loose and has to be replaced,” explains Dr.-Ing. Peter Quadbeck of the Fraunhofer Institute for Manufacturing and Advanced Mate- rials IFAM in Dresden. Quadbeck coordinates the “TiFoam” Project, which yielded a titanium-based substance for a new generation of implants. The foam-like structure of the substance resembles the spongiosa found inside the bone.
The titanium foam is the result of a powder metal- lurgy-based molding process that has already pro- ven its value in the industrial production of ceramic filters for aluminum casting. Open-cell polyurethane (PU) foams are saturated with a solution consisting of a binding medium and a fine titanium powder. The powder cleaves to the cellular structures of the foams. The PU and binding agents are then vapo- rized. What remains is a semblance of the foam structures, which is ultimately sintered.
“The mechanical properties of titanium foams made this way closely approach those of the human bone,” reports Quadbeck. “This applies foremost to the balance between extreme durability and minimal rigidity.” The former is an important precondition for its use on bones, which have to sustain the forces of both weight and motion. Bone-like rigidity allows for stress forces to be transmitted; with the new formati- on of bone cells, it also fosters healing of the implant. Consequently, stress can and should be applied to the implant immediately after insertion.
In the “TiFoam” project, the research partners con- centrated on demonstrating the viability of titanium foam for replacement of defective vertebral bodies.
10-09 :: September 2010
The foam is equally suitable for “repairing” other severely stressed bones. In addition to the materials scientists from the Fraunhofer institutes IFAM and IKTS – the Institute for Ceramic Technologies and Systems in Dresden – physicians from the medical center at the Technical University of Dresden and from several companies were involved in developing the titanium foam. Project partner InnoTERE already announced that it would soon develop and manufac- ture “TiFoam”-based bone implants.
Dr.-Ing. Peter Quadbeck & Cornelia Müller, Dresden Branch of the Fraunhofer Institute for Manufacturing Technology and Advanced Materials (IFAM):
http://www.ifam-dd.fraunhofer.de/fhg/ifam_dd/EN/
Direct Biological Conversion of Solar Energy to Volatile Hydrocarbon Fuels by Engineered Cyanobacteria (DirectFuel)
The Albert-Ludwigs-University Freiburg participates in the new EU-funded FP7 collaborative project „Direct biological conversion of solar energy to volatile hydrocarbon fuels by engineered cyano- bacteria“ (Acronym: DirectFuel), starting OCT 1, 2010, with Prof. Wolfgang Hess, Department of Genetics, Faculty of Biology, as the principal investi- gator. The 9-partner project is coordinated from the University of Turku, Finland and is carried out over 4 years, with a total maximum project funding of EUR3,729,519.
The consortium includes partners in seven countries: Finland, Germany, UK, USA, Denmark, Italy and the Czech Republic. The DirectFuel project is combining
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81