REFERENCES
1. Luo, A.A., “Wrought Magnesium Alloys and Manufacturing Processes for Automotive Applications”, SAE Technical Paper 2005-01-0734, Detroit, MI (2005).
2. Aragones, J., Goundan, K., Kolp, S., Osborne, R., Ouimet, L. and Pinch, W., “Development of the 2006 Corvette Z06 Structural Cast Magnesium Crossmember”, SAE Technical Paper 2005-01-0340, Detroit, MI (2005).
3. Luo, A.A., “Recent Magnesium Alloy Development for Automotive Powertrain Applications”, Magnesium Alloys 2003, Materials Science Forum, Trans Tech, Switzerland, vols. 419-422, pp. 57-66 (2003).
4. Bakke, P., Pettersen, K. and Albright, D., “The Influence of Sb, Si and Sn on the Mechanical Properties of Mg-Al Alloys”, in Magnesium Technology 2004, ed. A.A. Luo, TMS, Warrendale, PA, pp. 289-296 (2004).
5. Cohen, S., Goren-Muginstein, G.R., Avraham, S., Dehm G. and Bamberger, M., “Phase Formation, Precipitation and Strengthening Mechanisms in Mg- Zn-Sn and Mg-Zn-Sn-Ca Alloys”, in Magnesium Technology 2004, ed. A.A. Luo, TMS, Warrendale, PA, pp. 301-305 (2004).
6. Bowles, A.L., Blawert, C., Hort. N. and Kainer, K.U., “Microstructural Investigation of the Mg-Sn and Mg- Sn-Al Alloy Systems”, in Magnesium Technology 2004, ed. A.A. Luo, TMS, Warrendale, PA, pp. 307- 310 (2004).
7. Bakke, P. and Westengen, H., “The Role of Rare Earth Elements in Structure and Property Control of Magnesium Die Casting Alloys”, in Magnesium Technology 2005, eds. N.R. Neelameggham, H.I. Kaplan and B.R. Powell, TMS, Warrendale, PA, pp. 291-296 (2004).
8. Lyon, P., “New Magnesium Alloy for Aerospace and Specialty Applications”, in Magnesium Technology 2004, ed. A.A. Luo, TMS, Warrendale, PA, pp. 311- 315 (2004).
9. Lyon, P., Wilks, T. and Syed, I., “The Influence of Alloying Elements and Heat Treatment upon the Properties of Elektron 21 (EV31A) Alloy”, in Magnesium Technology 2005, eds. N.R. Neelameggham, H.I. Kaplan and B.R. Powell, TMS, Warrendale, PA, pp. 203-308 (2004).
10. Greiner, J., Doerr, C., Nauerz, H. and Graeve M., “The ‘New 7G-TRONIC’ of Mercedes-Benz: Innovative Transmission Technology for Better Driving Performance, Comfort, and Fuel Economy,” SAE Technical Paper No. 2004-01-0649 (2004).
11. Hoeschl, M., Wagener, W., and Wolfe, J., “BMW’s Magnesium-Aluminum Composite Crankcase: State- of-the-Art Light Metal Casting and Manufacturing,” SAE Technical Paper 2006-01-0069 (2006).
12. Brown, Z., Luo, A.A., Musser, M., Ouimet, L.J., Sadayappan, K., Zindel, J., Beals, R., “Development of Super-Vacuum Die Casting Process for Magnesium Alloys”, North American Die Casting Association Transactions, T09-043 (2009).
13. ASM Specialty Handbook: Magnesium and Magnesium Alloys, eds., M.M. Avedesian and H. Baker, ASM International, Materials Park, OH (1999).
14. Luo, A.A., Fu, P.H., Yu, Y.D., Jiang, H.Y.. Peng, L.M.,. Zhai, C.Q, Sachdev, A.K. “Vacuum-Assisted High Pressure Die Casting of AZ91 Magnesium Alloy”, North American Die Casting Association Transactions, T08-083 (2008).
15. Sequeira, W.P., Dunlop G.L. and Murray M.T., “Effect of Section Thickness and Microstructure on the Mechanical Properties of High Pressure Die Cast Magnesium Alloy AZ91D”, in Proc. of the Third International Magnesium Conference, Ed., G.W. Lorimer, The Institute of Materials, London, UK, 63- 73 (1996).
16. ASM International, Alloy Digest, Aluminum A380.0 (Aluminum Die-Casting Alloy), Materials Park, OH, (2002).
17. Song, G., “Recent Progress in Corrosion and Protection of Magnesium Alloys”, Advanced Engineering Materials, vol. 7, no. 7, pp. 563-586. (2005).
58
International Journal of Metalcasting/Fall 10
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85