REFERENCES
1. Monroe, C.A., Beckermann, C., and Klinkhammer, J., “Simulation of Deformation and Hot Tear Formation Using a Visco-Plastic Model with Damage,” in Modeling of Casting, Welding, and Advanced Solidification Processes - XII, eds. S.L. Cockcroft and D.M. Maijer, TMS, Warrendale, PA, 2009, pp. 313-320.
2. Ahearn, P.J., Quigley, F., Bluhm, J.I., and Wallace J.F.,, “Some Considerations On The Tensile And Transverse Strength Testing Of Shell Mold And Core Sands,” AFS Transactions, vol. 64, pp. 125-132 (1956).
3. Quigley, F., Ahearn, P.J., and Wallace J.F., “Influence Of Various Bonding Materials On Stress-Strain Characteristics Of Bonded Sands,” AFS Transactions, vol. 65, pp. 319-322 (1957).
4. “Final Report,” Arbeitsgemeinschaft Industrieller Forschungsvereinigungen Otto von Guericke, e.V. (AiF), (2008).
5. Thiel, J., “High Temperature Physical Properties of Chemically Bonded Sands Provide Insight into Core Distortion,” Proc. 62nd
Conference, Chicago, Illinois, December 2008. SFSA Technical and Operating
6. ASTM Standard C1211, 2002 (2008), “Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures,” ASTM International, West Conshohocken, PA, 2008, DOI: 10.1520/C1211-02R08.
7. ASTM Standard D5934, 2002 “Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending,” ASTM International, West Conshohocken, PA, 2002, DOI: 10.1520/D5934-02. 8. MAGMASOFT®
v4.6, MAGMA GmbH, Kackertstrasse 11, 52072 Aachen, Germany.
9. Naro, R.L. and Hart, J.F., “Phenolic Urethane No-Bake Binders: Ten Years of Progress,” AFS Transactions, vol. 88, pp. 57-66 (1980).
10. Sakumoto, Y., Nakazato, T., and Matsuzaki, A., “High-Temperature Properties of Stainless Steel for Building Structures,” Journal of Structural Engineering, vol. 122, n 4, pp. 399-406, (April 1996).
11. Giese, S.R.., Roorda, S.C., and Patterson, M.A., “Thermal Analysis of Phenolic Urethane Binder and Correlated Properties,” AFS Transactions, vol. 117, pp. 355-366 (2009).
18
International Journal of Metalcasting/Fall 10
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85