. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inDustry neWs
Lethbridge Iron Works Completes $9 Million Expansion
Lethbridge Iron Works added an automated molding line in a 25,000-sq.-ft. expansion.
Lethbridge Iron Works, Lethbridge, Alberta, Canada, has completed a 25,000-sq.-ft. building addition and equipment installation for $9 million and expects to begin production in the new facility in August. “The anticipation is for it to be running after our summer shutdown, subject to getting all the bugs worked out,” said John Davies, Lethbridge president. The equipment installed in the new facility includes
an automated 44 x 32 x 13-in. green sand molding line, a robotic grinder, an automated pouring system with a gantry crane, a pouring hood ventilation system for fume collection, a sprue drill system, and a new shakeout, manipulator and shot blast. Davies said the new molding line is rated at 60 molds per
hour, and the company expects to use it to produce cast- ing weights between 70 and 500 lbs. The expansion should increase the company’s larger casting capacity by 300%, taking it from less than 2 tons of castings per hour to more than 5 tons. This does not include the company’s four smaller molding lines, where most of its production is centered. Lethbridge began the expansion prior to the economic
downturn that occurred toward the end of 2008, but Davies said the company was committed to the project and believes it will benefit from it in the long run. “We produce what we consider larger castings…on two
molding machines but sold out that line and needed addi- tional capacity [several years ago],” Davies said. “We have taken a little longer to complete the expansion, but we hope it will be running smoothly when the economy does return.” For now, the company expects to feed the new equipment
with its existing sand and melt systems and run it primarily while the main facility is off production. As capacity on the new system is filled, Davies said the company will consider the installation of new furnaces and sand conditioning equipment. Lethbridge serves a number of end-use markets, includ-
ing the agricultural, secondary automotive, rail, and oil and gas industries.
METAL 10 Metal Casting Design & PurChasing May/June 2010
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68