Surveying - Replacement Window & Doorsets
General: Surveyor
Good surveying is the basis of ensuring a quality installation.
Surveyors should be fully trained in window and doorset installation
techniques and be aware of the manufacturers recommendations for the
particular window / door system being used and maximum manufacturing
sizes.
In order to comply with the building regulations, it is advisable to make notes
and photograph the window / door style which is being replaced along with
sizes and of the opening lights and mullion / transom positions.
The surveyor will be able to inform the purchaser / owner of any
enhancements that could be made with respect to security issues and
possible ventilation.
Risk assessment must be carried out for window / doorset design.
Risk assessment for the installation must also be carried out.
Where load-bearing situations occur, the system suppliers
recommendations must be followed.
Check that replacement window / doorsets will not infringe any Local
Authority planning controls i.e Conservation, Article 4 Direct.
Make Notes Take Photographs Risk Assessment
Issue: 2 (January 2008) 5
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70