The Screen Print Column
Washing out the problems related to stencil processing
This month William Shorter, on behalf of CPS, explores and explains the more complex side of stencil processing. Even though these are relatively straightforward processes, there are still a number of key factors that you need to get right in order to produce a good screen.
Follow these tips to produce a good screen
Washout booth
Screens should be developed in a dedicated washout booth that is separate from the screen cleaning booth. This will prevent potential contamination of the stencil from the decorating chemicals used to strip the stencil. The washout booth should be positioned in a yellow safelight area to prevent the screens fogging while waiting to be developed, but should be fitted with a white backlight to enable effective screen inspection during washout.
Water temperature and pressure The water used for the washout should be filtered to prevent particles in the water supply from becoming embedded in the soft emulsion surface. The optimum water temperature for developing direct stencils is 15 to 30°C; too cold and it will slow down the washout and too hot may cause the emulsion to soften and swell.
The washout pressure should be quite strong (4-6 BAR) and with a good spray pattern. The object is to quickly dissolve and rinse away the unexposed emulsion without softening or damaging the stencil. For manual washout it is good practice to wet down the squeegee side first and then conduct most of the washout from the print side of the screen, as that is where the bulk of the stencil is. If you are tempted to use a high pressure gun (HPG) to wash out the stencil, select a diffuse spray pattern and make sure that it is held at least 0.5m from the stencil. Never use the gun from the squeegee side as it will blow the stencil off the mesh.
For small screen development for ultra high definition applications, a compressed air accelerated washout can be used with great effect, as this opens up the fine detail with minimal risk of damage to very fine lines/tracks.
| 22 | January 2018 Automated washout
For processing large screens in a busy shop, an automated washout system can help significantly. These tower developers wash out the screen from both sides and often reuse the developing water for the first part of the washout to minimise water consumption.
Stencil washout faults
Stencil breakdown – If screens break down during washout, this is often a sign of gross underexposure and/or insufficient drying of the stencil prior to exposure. Breakdown can also be caused by too hot water temperature, or too high water pressure.
When developing ultra thick stencils (>100 microns) avoid the temptation to pre-soak the screens, as this will soften the stencil leading to breakdown during washout. It is best to use a strong water spray from the print side only as this will give the best result. Scumming – This can be seen as a transparent glossy residue in the open areas of the dried stencil and is caused by incomplete washout from the squeegee side (also a sign of underexposure), or possibly emulsion build up in re- circulated washout water supply.
Summary
Every stage in the process of screen making is important and contains variables that may affect the final output. A basic understanding of all elements of screen making and a methodical approach to fault finding will pay dividends in the long run.
www.printwearandpromotion.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108
