INDUSTRY INSIGHT
www.heatingandventilating.net
Boiler Plus: the future W
It’s been a year since the enactment of Boiler Plus, and many installers and manufacturers are waiting with interest to hear the results of BEIS’ pledged ‘one year’ review, promised to take place last month. Here, Mark Wilkins, head of training and external affairs at Vaillant, looks at what the review should consider if it is to build on the initial successes of Boiler Plus
hilst some installers were already well in advance of the requirements of Boiler Plus, it has been a step change for others. There
was also resistance from some to complying with the requirements of Boiler Plus and BEIS had to ultimately issue a definitive statement to bring them in line. Similarly, the precise definition of ‘smart thermostat’ initially caused discussion, and was eventually clarified by documents such as the HHIC’s ‘Boiler Plus additional guidance’. However, the legislation has now widely been
embraced by both installers and manufacturers, resulting in an increased emphasis on energy efficiency across the board – which can only be a positive thing. That being said, there is much further to go, and
here at Vaillant, there are several points which we hope will come through in the anticipated Boiler Plus anniversary review.
A wider scope
As it stands, Boiler Plus only applies to combi boiler installations. Obviously, this is a logical place to start, but the reality is that this misses around 25% of the market. Whilst it’s good to see a greater emphasis on the efficiency of combis, we would like to see the review examine how Boiler Plus could be applied to system and open vent boilers, along with heat pumps and other heating technologies – essentially evolving Boiler Plus to become ‘Heating Plus’. All of our products, combis and beyond, have the ability to meet the enhanced control requirements set out by Boiler Plus. Our smart controls provide
Mark Wilkins of Vaillant
intelligence to the system by looking at indoor and outdoor temperatures, optimising the performance of both heating and hot water. The controls also provide operating notifications as well as information on how much energy the homeowner is using. Ultimately, Boiler Plus should not just be about the efficiency of combi boilers; the additional controls requirements should extend to all heating systems irrespective of the heat generator. The HHIC has also publically urged that the
Government take the opportunity of the first anniversary review to extend Boiler Plus. Improvements suggested by the HHIC include broadening the legislation to apply to annual boiler
servicing work, and, echoing Vaillant’s sentiments, to include other heat generators too.
Water quality
Given that system water quality directly impacts efficiency, the next logical step for Boiler Plus is to acknowledge it as a factor and add measures to address it.
Without clean water, even the most efficient boiler
will not be able to deliver its optimal output. We therefore hope that managing water quality and system debris are taken into account in any revisions to the legislation.
Hydraulic balancing
BEIS should review how Boiler Plus could apply to protecting a heating system and ensuring installation best practice, such as hydraulic balancing. This is something Vaillant whole-heartedly supports, after all, the UK would not be the first nation to mandate hydraulic balancing, with Germany making it a legal requirement several years ago. Whether the balancing itself becomes a requirement, or greater emphasis is placed on awareness, this is certainly worth consideration when it comes to reviewing improvements to Boiler Plus. Boiler Plus was a good start – but there is much further to go. By continuing to build on the success of the original requirements, the Government can drive further efficiencies and offer even greater benefit to the homeowner. We look forward to the results of the review, and continue to support such advancements in our industry.
exceptional protection. At the heart of the device is an electrochemical
Safetymatters T
he Ei3018 mains powered carbon monoxide alarm from Aico is said to bring together the latest technologies into one alarm for
carbon monoxide sensor which has a 10-year life. It is pre-calibrated and tested in carbon monoxide gas to ensure accuracy. When in alarm mode, the level of carbon monoxide detected is indicated by the flash rate of the red LED on the unit and the
sounder incorporated within it. The Ei3018 comes with a number of features including AudioLINK data extraction, SmartLINK wireless interconnection and whole system data monitoring capability. AudioLINK data extraction technology enables
real time alarm data (e.g. number of times tested and details of alarm activations) to be extracted directly to a smartphone or tablet via an app which creates an Alarm Status Report.
It identifies any issues enabling action to be taken May 2019
PRODUCT FOCUS
immediately, which is effective for tenant safety and in reducing the cost of return visits to a property. AudioLINK also aids compliance for landlords, providing proof that alarms are working at the start of a new tenancy and with annual Gas Safety Checks. Next generation Radio Frequency (RF) technology, SmartLINK enables alarms and system accessories to be interconnected using RF signals rather than hard wiring.
www.heatingandventilating.net
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48
