Pr


sm a li


The Germanmanufacturer showcased the PICO-KNX at Lux Live at the ExCel in London in November. It has dimensions of only 33mmx 34mm height and can be installed in almost anymounting and can easily be integrated into luminaires.


T


al selectedelectricalwh fa


Despite its small size, the detector has a detection area of 10min diameter at amounting height of 2.5mand of approximately 12mat a mounting height of 3m. The PICO-KNX offe


ffers almost all the functionally of the new range of


advanced BEG KNX Generation Six Deluxe presence detectors which include built-in logic as well as sound and temperaturemonitoring - an industry-first fofor the KNXmarket. The PICO-KNX offe


ffers condensed presence with shortened fofollow-up time


aftfter brief occupancy of the roomand an offset function which allows end users to create up to three lighting zones fofor a unifoformlighting level throughout the room. Thanks to the bidirectional remote-control capability, the programmed parameters can be accessed at any time and activated comfofortably using the remote control.


“Thebuilt-intempera nothav sav


ACactuators.Thismeans rate temperature ave


VAC ra


Co tr lsKNXS ag r,


ro


sensorwill sendtemperature readings totheKNXbus tobeused byHVA separa


rature ra


re sensorsdo aving electrical contra


ve tobefittedtothewall, ractors time


and, endusersmoneyonthe installationcosts.” -BEGLightin Controls KNX System Sales Manager, Stephen Payneayne


tephe Pa ewnews.c.co.ws o.u.uk


BEG Lighting emSales


BEG Lighting Controls KNX SystemSalesManager,r, Stephen Payne, said: “We successfully demonstrated the PICO to dozens visitors at Lux Live at the end of last year and they were very impressed. It will now be available in selected electrical wholesalers.


“The logicmodule is independent of the detector operation and has proved to bemost useful to KNX integrators. The integrated sound sensor can be used in areas where there are restrictions to the normal presence such as toilet cubicles. If configured the sound sensor will ut only aftftermotion is detected. Run-on times are configurable. “The built-in temperature sensor will send temperature readings to the KNX bus to be used by HVA


activate, b detection


VAC actuators. Thismeans separate temperature


sensors do not have to be fitted to the wall, saving electrical contractors time and, end usersmoney on the installation costs.”


www.beg-luxomat.com www xo Janu nuary202 020 el electricalwh es wholesaler | 5


ProductNews Ne


Wholesalers shine ght onworld’s’s


allestKNXsensor


Visitors atLuxLivive at theExCel inLondon inNov mbovember lastyearwere impressedby BEG Lighting Co tr


BEGLighting hewo


controls special inseveral el


ngControlls’ P O-KNX s’PICO-KNX


world’s’s smallestKNXoccupancydetectorbyligighting alistBEGLigightingControls isnowbeing stocke alwholesalers.


ked KNX sensor


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64