PROCESS GAS HEATING
A SENSE OF ACHIEVEMENT Three major accreditations confirm Lanemark Combustion Engineering’s quality, environmental and manufacturing performance
P
rocess gas heating specialists Lanemark Combustion Engineering Ltd. are delighted to announce the achievement
of three major industrial international accreditations which, simultaneously, define the company’s management, environmental and health and safety commitment. “By being able to hold ISO 14001
Environmental Accreditation, ISO 45001 Health and Safety Accreditation and ISO 9001 Quality Accreditation at the same time reflects well on both our organisation and, of course, the people within it,” said Alan Thompson, Lanemark’s operations director. ISO 14001 certification demonstrates
Lanemark’s commitment to controlling environmental impact, meeting relevant legal obligations and its focus on continuous improvement. Alongside this, ISO 45001 shows specific compliance with Health and Safety
law and reflects on the methods and procedures across a wide range of company activities. Similarly, ISO 9001 demonstrates Lanemark’s focus on delivering consistent, high quality products and services. “Increasingly, our customers are looking to
their suppliers to deliver fully in these key areas so, apart from helping to ensure that we are meeting clearly structured goals, these certifications underpin our sales efforts and ongoing work with customers across all markets,” said Jeff Foster, sales director. Having been heavily involved in the approval
processes, Lanemark’s Joanne Topp, Integrated Management System (IMS) administration officer, and Lee Carroll, Health & Safety/IMS training coordinator, are now responsible for the ongoing implementation of the three standards – each of which will be subject to periodic assessment and audit in
FE-DEC16-LANEMARK:FE-DEC16-LANEMARKS 1/5/17 2:30 PM Page 1 Gas Process Burners
Lanemark gas burner systems offer users reliable, high effi ciency, process heating solutions.
FD Series Packaged Oven/Dryer Burners
• Specifi cally designed for process air heating applications in convection ovens and dryers
• High turndown/short fl ame lengths providing accurate process temperature control
• High effi ciency gas + air modulation, gas only modulation and simple high/low control options
• Heat Input Range: 9 kW – 1550 kW TX Series Gas Fired Process Tank Heating Systems
FD-C high turndown oven/ dryer air heating burners.
FD-GA modulating gas + air process air heating burners.
FD-E low cost high turndown oven/dryer air heating burners.
• High effi ciency (80%+) heating of all types of spray and dip process tanks
• Compact high effi ciency small diameter immersion tube heat exchangers occupying minimum tank space
• Accurate performance modelling using Lanemark TxCalc design software
• Direct fi red, high effi ciency burner systems, for high volume air heating applications such as paint spray booths, ovens and dryers.
• Supplied either as Midco burner heads for OEM system integration or as Lanemark DB or FDB complete packaged systems including modulating
gas valve trains and controls
Midco HMA high efficiency, high turndown, air replacement or “make-up” air heating burners.
TX high efficiency small diameter immersion tube tank heating systems.
Lanemark Combustion Engineering Limited
Lanemark House, Whitacre Road, Nuneaton, Warwickshire CV11 6BW United Kingdom Tel: +44 (0) 24 7635 2000 Fax: +44 (0) 24 7634 1166 E-mail:
info@lanemark.com
www.lanemark.com
C OMBU ST I ON EN G I N E E R I N G
• Wide range of fi ring rates to suit alternative temperature rise and air velocity system requirements
• DbCalc system design software
• Heat Input Range: 15 kW (1½") – 1150 kW (8") Midco HMA Series Air Replacement or “Make-Up” Air Heating Burners
Lee Carroll, Health & Safety/IMS training coordinator, and Joanne Topp, Integrated Management System (IMS) administration officer
the future to ensure the high standards defined are being fully maintained. “As a specialist manufacturing organisation,
with customers ranging from brewing and surface finishing to petrochemical processing, and working in the highly controlled field of gas engineering, we have long been aware of our own and our customers’ requirements. Now, being able to hold all three certifications concurrently demonstrates the performance and gains that can be achieved by our approach – to the benefit of all concerned,” Foster concluded.
Lanemark Combustion Engineering
www.lanemark.com
09:04 SEPTEMBER 2021 | PROCESS & CONTROL 21
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70
