TECHNOLOGY IN ACTION
he iT300 transmitter provides an easy means to connect a standard vibration sensor to a PLC, DCS or SCADA system. The transmitter’s input provides power to and measures the signal from either an accelerometer, piezovelocity sensor or dual output sensor.
Intelligent Vibration Tr ansmitter T
The input circuitry has a wide frequency response, capable
Need to keep track? There’s a Cy
Cynergy3 sensor for that?
without wires to a central wireless receiver which converts each received pressure signal channel to a 1-5Vdc or 4-20mA output.
The IWPT wireless pressure sensor and receiver is a cost effective replacement to a traditionally wired pressure sensor that offers the advantages of a low-cost installation in inaccessible and expensive installation environments. The key benefit of wireless is avoiding long, tortuous or expensive cable runs over larger areas. The battery powered wireless pressure sensors can have a range of up to 750m, easily paired to the compatible IWR family of single or five-channel wirele measurement systems.
Setting up is quick and easy Cynergy3 01202 897969 www.cynergy3.co
m ifm electronic Ltd 020 8213 0000 www.ifm.co
, with free configuration ss receivers for multi-
software available for more complex systems. Cynergy
ireless battery powered pressure sensor and receiver system for connecting up to 5 pressure sensors
of measuring signals between 0.2 Hz and 20,000 Hz. The transmitter has two indepe analog
outputs. The channels contain selectable i ndent processing bands with flexible mapp
as acceleration or velocity.
KDP will be exhibiting at the Sensors & Instrumentation Show, NEC Birmingham – 25th & 26th September, please visit us on stan d 94.
DP Ellectronics 01767 651058
ectronics Systemystems www.kdpes.co.uk
All-in-one sensor helps reduce energy costs O
ntegration, allowing outputs ing options to two 4-20mA
ptimising production processes by improving energy efficiency and reducing costs are likely to be high priorities for most manufacturers and they can be achieved, thanks in part to the availability of increasingly sophisticated monitoring and measuring devices. A good example of this is the new SD family of Thermal Compressed Air Meters from ifm electronic, which incorporates an integrated pressure and temperature sensor. The SD family of devices have been developed as an ‘all-in-one-sensor’ to provide ‘at-a-glance’ compressed air monitoring totalised volume plus pressure and temperature of
the air. With clear TFT with volumetric flow,
display and IO-Link interface, the unit can be easily parameterised and all information transferred to the control platform.
The SD sensors can also help toward improving energy efficiency of process installations thanks to its ability to precisely monitor for leakages. This, combined with its high repeatability, enables exact location of the costs of compressed air consumption to the respective production line which helps operators to optimise product cost calculations.
ABB’s newDodge® SafetyMount
spherical roller bearings cut installation time by up to 75 p ercen t
BB has launched Dodge® Safety Mount spherical roller bearings with a built-in patented locking mechanism that reduces installation time by up to 75 percent compared to traditional products. Best suited for bulk material and air handling applications, the new bearing mounts by tightening fasteners instead of using a hammer and other tools. The new system also allows for simple installation and removal from the same side of the bearing, which means only one person is needed for the task.
“The new mounting system replaces the blows of a hammer with the tightening of fasteners,” says Jim Madsen, Dodge Mounted Roller Bearing Product Manager, ABB. “It also makes it faster to install large bearings, but more importantly, it makes it safer for the installer.”
Safety Mount bearings feature a triple-lip contact seal and corrosion-resistant flinger sealing system which pre- vents contamination from entering the product during installation and operation. A labyrinth seal option is available for high-speed and high-temperature applications.
Dodge Safety Mount spherical roller bearings are suitable for use with the ABB AbilityTM Smart Sensor for mount- ed bearings, an easy-to-use, wireless sensor that monitors the health of bearings.
Dodge Safety Mount bearings combine the advantages of the Dodge Imperial family of bearings: factory sealed and greased, shaft ready out of the box, with no feeler gauges required. They are offered in split cap and single piece housing options in standard SAF, metric SN, Type E, and Imperial housing dimensions in sizes 4-15/16” to 7” (115 mm to 170 mm).
AB 48 48 ABB Lt Ltd JULY UGU JULY/AUGUST 201 2019 | PROCESS PROCESS & CO 01925 741 111 CONTRO ROL www.abb.co
m CONNECTIN G DNI CONNECTING W
CPH7000 portable process calibrator
IKA's CPH7000 portable process calibrator has received ATEX approval. It is therefore also suitable
for use in hazardous areas.
The CPH7000 provides highly flexible on-site calibration for process transmitters and pressure gauges. A high- pressure version even tests measuring ranges up to 10,000 bar. The portable, multi-function instrument integrates an electronics module, a hand pump for generating test pres- rformance data logger.
for the measurement parameters o Due to its equipment, the CPH7000 sures of up to 25 bar and a high-pe
and current. WIK
WIKA Instrume Instruments Ltd +44 (0) 1737 644008
USTRY. M/P OCESS&CONT OL
f temperature, voltage also fulfils test tasks
| Page 2
| Page 3
| Page 4
| Page 5
| Page 6
| Page 7
| Page 8
| Page 9
| Page 10
| Page 11
| Page 12
| Page 13
| Page 14
| Page 15
| Page 16
| Page 17
| Page 18
| Page 19
| Page 20
| Page 21
| Page 22
| Page 23
| Page 24
| Page 25
| Page 26
| Page 27
| Page 28
| Page 29
| Page 30
| Page 31
| Page 32
| Page 33
| Page 34
| Page 35
| Page 36
| Page 37
| Page 38
| Page 39
| Page 40
| Page 41
| Page 42
| Page 43
| Page 44
| Page 45
| Page 46
| Page 47
| Page 48
| Page 49
| Page 50
| Page 51
| Page 52
| Page 53
| Page 54
| Page 55
| Page 56
| Page 57
| Page 58
| Page 59
| Page 60