PRODUCTS EDITOR’S CHOICE
DUAL-MODE LPWA COMPLIANT WIRELESS COMMUNICATION LSI
and the international protocol IEEE802.15.4K that is extremely robust against interference from the same system and has the capacity to cover more terminals under one network. This dual-mode capability enables use in a wide range of applications/ specifications. Communication modules containing
An RF LSI optimised for LPWA (Low Power Wide Area) has been released by ROHM Group company LAPIS Semiconductor. The ML7404 is one of the first
wireless communication LSI’s in the industry to feature LPWA dual-mode functionality, supporting both the Sigfox standard (subscription-based LPWA using unlicensed sub-GHz). This has been adopted in more than 30 countries and is expanding in metropolitan areas including Japan,
this device will be released from partner companies to simplify the development of LPWA-compatible devices that contribute increased IoT adoption. In addition, the protocol stack for IEEE802.15.4k will be provided as open-source from ROMH’s partner stack vendors. Because the specific communication
protocol varies from one country/ region to the next, as of yet no method has been standardised.
www.rohm.com/eu
TECHNICAL PARTNERSHIP FOR PIONEERING DIABETES MONITORING PRODUCT
innovative ability to monitor both blood glucose and blood ketones in diabetic patients, with the ability to provide warnings when levels exceed limits that are clinically relevant.
AWS has supported this highly-
AWS is working alongside a healthcare medical technology company to develop and manufacture a revolutionary state- of-the-art medical device. The pioneering diabetes monitoring product, first launched in 2016, has received extensive recognition for its
invested UK start-up with a clear manufacturing strategy to aid their cutting-edge biometric technology, recognising ‘speed to market’ as a critical factor in the success of a new product launch. AWS’ vast experience within the medical devices industry, coupled with its ISO 13485 and ISO 9001:2015 accreditations, make AWS the perfect partner in the complex PCBA and unit assembly required for the ground-breaking device.
www.awselectronicsgroup.com
INTERPOSERS FOR PCB CONNECTIONS
ECT interposers are designed for connecting and disconnecting PCBs. The company makes interposers that fully meet the electrical requirements of a wide variety of applications offering a high density, short profile interconnection. ECT offers an extensive
catalogue of spring probes to meet a range of electrical requirements including low resistance, high current, and signal integrity. These probes can then be mounted directly to a connecting board or housed in
plastic, offering versatility in board to board connections, while the compliant aspect of spring probes naturally accommodates the misalignment tolerances often found in board to board interconnect applications. ECT interposers ensure high
cycle life contacts and low and stable contact resistance in a high density contact area. They connect and disconnect easily and eliminate the need for any wired or cabled solutions.
ect-cpg.com
/ ELECTRONICS ELECTRONICS | SEPTEMBER 2017 23
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64
