DS-MAR23-PG46_Layout 1 17/03/2023 14:26 Page 1


FEATURE HYDRAULICS & PNEUMATICS


SPECIFY THE RIGHT PUMP TO SAVE ENERGY


With energy costs high on the agenda for many today, Steve Schofield, CEO at the British Pump Manufacturers’ Association,


examines how significant savings can be made through the correct selection and efficient operation of pumps and their related systems


pump system auditor scheme


Given the amount of energy consumed by pumps in their normal operation, and the potential for energy efficiency gains within pump systems, the BPMA has developed the Certified Pump System Auditor Scheme (CPSA). Through this, pump engineers are being trained to correctly assess the efficiency of pump systems, and to provide appropriate recommendations in order to improve the efficiency of those systems. The CPSA accreditation is achieved by successfully completing a four-day residential course, followed by the satisfactory completion of a pump system audit. Only then can ‘Certified Pump System Auditor’ status be achieved. Within the full ESOS Guidance document, the


ISO/14414-Pump System Energy Assessment standard is referenced as an auditing methodology that can be accepted by ‘Lead Assessors’ approved by the Environment Agency. Accordingly, it is hoped that CPSA accredited persons (who are trained according to the IS0 14414 standard) will be recommended by Lead Assessors to undertake the pumping system elements of company-wide energy audits.


T “If pump systems are


he operation of pumps and their associated systems accounts for around 20% of the world’s entire electrical energy consumption;


and in some high-use industrial applications, this can be as much as 25-50% of the total electrical energy usage. Across the European continent pumps are the single largest user of electricity within industry, consuming over 300 TWhpa of electricity, which in turn accounts for over 65


Mton of CO2 emissions. However, the majority of pump systems in


operation today were not originally designed with energy conservation as a major consideration. It is now well documented that rotodynamic pumps, which account for 80% of the installed base across Europe, are between 20-30% oversized. This is usually due to an in-built ‘safety factor’ allowing for potential future uprates, or any wear in the pump or fouling of the system. But, this means they are using far too much energy for the required duty. As such, there is huge potential to save massive amounts of energy if these pumps are properly sized, operated and maintained. In fact, if pump systems are initially designed


with energy use in mind, and the pumps are optimised for efficiency, a saving of up to 50% in electrical energy can be achieved. It is important to know as much about the


pump system as possible and to create a pressure/flow profile for the system, as the


4 DESIGN SOLUTIONS MARCH 2023 6


energy required to drive the pump is directly related to the flow and pressure required.


energy audits


It is also important to carry out regularly energy audits to help determine where energy use reduction measures can be employed, and in turn how operating costs can be lowered. The government has estimated that most companies can reduce their energy consumption by 10-20%, and energy audits carried out in accordance with ISO 14414 have shown that savings of 30-50% are not unusual. By reviewing utility bills, it is possible to get an indication of the savings to be made and the investment that you should be prepared to put into the auditing process. Across most industrial sites, some two-thirds


of the total energy consumption is used to power electric motors, an integral part of any pump system. The overall cost associated with operating these essential pieces of equipment throughout their entire life span can be broken down as follows: 5% accounts for the initial purchase/installation costs; 10% for ongoing maintenance; and a massive 85% for the energy used to run them. Clearly, any reduction in the energy consumed


by electric motors is important, and with modern designs, that reduction can be as much as 30%. It is also evident that many pumps and motors are


initially designed with energy use in mind, and the pumps are


optimised for efficiency, a saving of up to 50% in electrical energy can be achieved”


It is hoped that with the heightened publicity


around the cost of energy, and society’s growing appreciation of its importance to our very existence, we will begin to see far greater urgency in the adoption of energy reduction measures across our commercial and industrial sectors. Supported by the evidence that significant


savings can be made through the correct selection and efficient operation of pumps and their related systems, the BPMA will continue its efforts to drive this important message.


BPMA www.bpma.org.uk


constantly operated at full power, irrespective of process needs, something which can be managed with the addition of variable speed drives. So, across Europe’s installed base, there is the potential for significant energy savings – savings which can, in turn, drop to the bottom line and increase the profitability of any business.


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56