Test & measurement
HIGH PRECISION SENSORS ENSURE ACCURACY AND QUALITY OF 3D PRINTED PARTS
3D 28
As potential applications for additive manufacturing increase, 3D printing machine makers rely on high precision non-contact sensors to measure a range of parameters such as position, displacement, tilt and temperature, as well as performing CAD comparisons of the printed components, says Glenn Wedgbrow, business development manager at Micro-Epsilon UK.
printing, also known as additive
manufacturing, originated as a tool for rapid prototyping,
though it has now evolved to encompass a number of different applications, including visual and functional prototypes, tooling aids and end-use parts. Depending on the specific measurement application on a 3D printing machine, the appropriate measuring sensor technology should be selected. These technolo- gies include capacitive, eddy current, inductive (LVDT), confocal, draw-wire (string pot), laser triangulation, and laser profile scanners. Here are some application examples where Micro-Epsilon non-contact sensors are used in 3D printing machines:
MONITORING THE TILTED SQUEEGEE Capacitive displacement sensors are used to monitor the position of the tilted squeegee. Two synchro- nised sensors measure, with high resolution, both ends of the squeegee to provide exact information about its tilt angle. This is to ensure that the powder bed has been pulled off evenly and that the build layers are consistent.
ORIENTATION AND POSITIONING OF THE BUILD PLATFORM
With selective laser sintering, the build platform is lowered after each melting cycle by a defined value which corresponds to the required Z resolution. Induc- tive displacement sensors based on eddy currents monitor this build platform in order to allow the print head to be aligned in parallel.
HIGH PRECISION SENSORS FOR PRINT HEAD TRACKING
Precise positioning of the print head is particularly necessary for 3D printing of complex components, as well as for PCB printing. Confocal sensors are used to check positioning with sub-micrometer accuracy. These measure the distance with the highest precision and at the same time have a high measuring rate. This also allows dynamic pressure processes to be controlled.
DETECTION OF PLATFORM TILT AND POSITION
Draw-wire displacement (string pot) sensors are used to continuously check the tilting of girder platforms. The sensors are mounted outside the pressure chamber. The measuring wire is guided into the pressure chamber via deflection pulleys. Therefore, this design is also suitable for environ- ments with high temperatures and dust formation. The compact sensors have large measuring ranges and can therefore detect the tilt even if the position of the platform varies greatly.
TEMPERATURE MONITORING OF THE POWDER BED
During laser sintering with CO2 lasers, thermal imaging cameras monitor the powder bed. The thermoMETER TIM thermal imaging cameras from Micro-Epsilon can be equipped with different lenses optimised for the respective measuring field. The high thermal sensi- tivity enables detection of the smallest temperature deviations. These high speed cameras also capable of capturing dynamic printing processes. Depending on the temperature to be measured, thermal imagers with specific detector wavelengths and/or filters are used to
ensure that no damage is done to the imager during the welding process.
HEAT DISTRIBUTION ON 3D PRINTED PARTS
To check the heat distribution of the printed compo- nents, thermal imaging cameras are used. These record the two-dimensional heat distribution from a safe distance and provide information on the stability of the joints and structures. The cameras can be used to monitor metal as well as plastic parts.
TEMPERATURE OF THE POWDER BED AND CARRIER PLATFORM
In certain 3D printing processes, the powder bed is heated to ensure defined processing temperatures. Miniature thermoMETER CT pyrometers from Micro-Ep- silon are used to monitor the temperatures. The sensors
November 2024 Instrumentation Monthly
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96
