Feature sponsored by Flow, level & control W
hen a municipal utility in the US was looking for a faster, cheaper way to find their Inflow and Infiltration (I&I) sources, they came to HWM for a new approach.
Inflow is surface water that enters the
wastewater collection system through cross- connections with storm drains and downspouts, and also through holes in manhole covers. Infiltration is groundwater, influenced by surface
or seawater, that enters sewer pipes through holes, breaks, joint failures and other openings. Increasing volumes of I&I can be
problematic for the utility as it can lead to the treatment works being overwhelmed and forced to spill, as well as backups into homes and buildings in the area. Frequent spills may lead to the authority’s
permit being exceeded, which can trigger fines from their environmental regulator and additional pressure through corrective action planning. Authorities under a corrective action plan
will be required to demonstrate that steps are being taken to address their I&I issues. Additionally, cleaning spills and treating excessive rainwater can weigh heavily on the utilities OpEx budget. To identify I&I, the authority had been using high accuracy open channel flow meters to conduct flow surveying. The high cost, and total install/analysis time required with this method prevented them from truly getting ahead of their I&I. Each flow meter can cost as much as
$20,000, and can take months to install, collect, analyse and then action any flow survey data. Even after this, the process will likely have to be repeated as the monitor is moved further upstream in the network to pinpoint I&I sources. The authority was looking for a better way to
find and fix I&I, and after discovering HWM at a conference, selected the SpillSens system. By hanging the angle-based sensor inside the
chamber at ‘low-flow’ level, the authority can quickly track the rise and fall of sewage flowing through the pipe, and compare it with rainfall events to establish the I&I entry points in their system. Analysis of this is simple and clear – the larger the peak during rainfall, the more
measuring critical inflow and infiltration data
rainwater is entering the system. The same data can also be used to inform better allocated deployment of inspection equipment, and longer-term system upgrades. The technology is considerably cheaper –
the authority was able to install 9 complete SpillSens systems, for 5-years, for the equivalent cost of one flow meter. Coupled with an install time of 5-10 minutes and near real-time data, this enabled the utility to quickly cover their system, and fast-track their understanding of I&I. As well as this, each unit can be quickly and simply moved to a different area of the collection system, allowing the utility to move upstream fast. SpillSens devices also provide SMS and/or
email alarms to operators when a pre- determined angle is reached – allowing the authority to react quickly to back-ups and get ahead of spills. These alarms can be checked at
a glance on HWMs online SpillGuard platform, against a GIS overlay of the pipe network. With this data, new devices can be deployed
on this branch of the network (or current devices can be re-deployed) to narrow down I&I problem. This method of monitoring allowed the utility to move quickly through their network, identifying their largest sources of I&I. The system is up-to-date too. SpillSens
devices call in, at minimum, once a day, whilst also providing alarms when a pre- determined angle is reached. This provides utilities with early surcharge
warnings, but also real-time I&I data. Data may be used to inform future decisions regarding inspection resource allocation (CCTV cameras, smoke/dye testing) and capital investment in system upgrades.
Hwm
www.hwmglobal.com
22
January 2023 Instrumentation Monthly
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82
