Oil & gas

firms need RTU systems that are robust, secure, reliable and flexible enough to be able to manage and monitor the plant’s diverse range of assets. RTUs are integrated with sensors across these sites and provide data to the SCADA system. Working the other way, RTUs can receive

commands from the supervisory system and transmit them to the end devices as well as retaining an ability to act autonomously. RTUs do this over large and remote downstream sites, handling the data acquisition portion of SCADA, providing early warning of impending issues — such as a rise in temperature of a holding tank, elevated temperature in a pump etc. — avoiding asset failure, and potential environmental incidents.

Tackling common issues

In practical terms, RTUs help operators overcome a wide range of issues in the oil and gas sector ranging from continuous monitoring of remote fixed assets, data logging — meaning critical data from the field is not missed and is available for analysis — through to managing complex remote automation and control applications without the need for operators in the field. Some of the specific issues that RTUs can

help address include: monitoring of flow, pressure, process equipment, temperature; natural gas flow measurement; optimisation and secondary recovery; storage facilities and pressure monitoring. A number of practical considerations must be

accounted for when choosing an RTU system to deliver these benefits. The key features that are required in an RTU are resilience to the site environment, an ability to operate with minimal drain on local power resources, and the processing power to perform any local control algorithms autonomously. It is also beneficial that an RTU has extensive

diagnostics capability and a low Mean Time to Repair (MTTR) to reduce the time required for technicians to spend on site, improving

both efficiency and personnel safety. An increased need for efficiency,

environmental protection and safety are driving the market for data analysis and monitoring of assets in the oil and gas sector. RTUs facilitate these processes because they can be deployed on a vast range of assets. Once in place, the real value of an RTU is that it can perform autonomous control in real time and then report to SCADA that it has everything under control. Operators at the SCADA interface can ‘supervise’ the operations by setting new KPIs, set points or updating instructions — open/close this, start/stop that, for example — for RTUs to then act upon and manage locally. This ability to provide accurate, real-time

data enables management teams to make better, more informed decisions. In addition, because RTUs do everything locally, it means if communications break down, they continue to run, maintaining a historical log, and reporting back later. In remote locations, communications will fail regularly, although RTUs can manage this. For instance, the data that the RTU collects can be used to support maintenance decisions, and to verify that environmental obligations are being adhered to. Currently, most RTUs are only used for operations, although they can support maintenance teams, health and safety initiatives and environmental management. RTUs have come a long way in the last few

years and as oil and gas companies face continued pressure to maintain efficiency, safety and deliver shareholder value, their use looks set to increase. Continued innovation will help drive this change; it is already possible to deploy RTUs on most equipment, whatever its size or age. Inbuilt redundancy and resilience are also helping to avoid system failures. At the same time, improvements in processing power and throughput are helping RTUs keep up with increasing demand for data. Looking to the future RTUs, which are already ‘mini PCs in the field’, will help harness the power

The TBox LT2 offers outstanding functionality from a single, compact rugged unit.

of IIoT by making older assets ‘smart’. Edge computing will come into the mix at some stage, although increased processing power of RTUs means they are already part of a distributed network, processed at the ‘edge’ of the network. The benefit if this is low latency by computing the data where it is generated — essential for real-time monitoring. In addition, this edge

capability provides linear scalability, which will be essential to support the increased deployment of communication devices that reduce pressure on the central

network infrastructure. With its geographically spread

assets and multiple process that all generate massive amounts of data, key to ensuring these improvements help business performance is being able to capture and interpret it in real-time. The latest, ruggedised RTU technology focuses specifically on that, helping operators meet their investor and customer commitments.

The TBox MS range, MS32S2 shown here, provides real-time remote access and control of your critical assets. Instrumentation Monthly March 2021 Ovarro 39

Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74