Test & measurement
Moisture measurement with the Solitrend from Endress+Hauser
Goods and products manufactured with industrial processes often contain water in various concentrations. Moisture has a critical impact on the quality, storage/shelf life and weight of the product – and thus the price. To date, laboratory instruments have been the most common tools for measuring moisture. While the processes are highly precise, they also have disadvantages. Endress+Hauser is enhancing an existing level measurement technology so that it is also capable of determining material characteristics. The radar-based sensors from Endress+Hauser supply real-time information regarding material moisture, thus increasing plant reliability and efficiency, as Alexander Edinger, product manager for Endress+Hauser Level+Pressure explains...
and process reliability, it is important to draw conclusions regarding moisture in the materials. This can range from extremely small amounts of water in dry products in the food industry to very high levels such as in drilling mud in the mining industry. In other words, it all boils down to the exact dosage of water in the process. Think of it in terms of baking a cake. The success of a recipe rides on adding the precise amount of each ingredient. Laboratory instruments are typically employed
T
for drawing conclusions regarding water content. To do that, dry and wet samples are weighed and compared. The results can then be used to draw conclusions about the water content. Although this method is precise and simple to use, it has several disadvantages. One of these is that the process sample is merely a representative snapshot. Drying can take from 30 minutes to 24 hours depending on the moisture content and the quantity and type of the sample. Meanwhile, the process continues to run and by the time the measurement result is available, it is already outdated. In addition, manual sampling is laborious and costly.
here are numerous reasons for using moisture measurement instruments. Because the water content in products can be a decisive factor for product quality
SubSTiTuTE for TiME- conSuMinG rAndoM SAMPLinG With the Solitrend family of products, Endress+Hauser has created a solution for continuous, process-based moisture measurements. The sensors, which are based on TDR technology, precisely determine the water content in bulk solids based on the runtime of a radar impulse across a ceramic measurement cell, using the physical effect of the increasing dielectric constant as it relates to increased water content. The moisture sensors are installed directly
in the bulk solid stream with the help of a bracket to ensure fast and reliable measurements. In the primaries industry, for example, material is often conveyed out in the open. In these environments, sensors are mounted directly under silo hatches, under the conveyer heads, where they can measure in free fall or from above where they are installed on the conveyers. This ensures that the sensor has a proper flow around it and can maintain direct contact with the material. The measurement values can be read out with an optional display or a control system (SPS). It is also possible to enter threshold values into the control system and trigger alarms when they are reached. This allows the water dosage to be controlled during the process.
48
MiniMAL WEAr, no cALibrATion Compared to other measurement methods, TDR enables a high degree of accuracy and deep penetration of the material, and it is not impacted by the grain size or contaminants. Thanks to their robust construction and the use of high-quality materials, the sensors are characterised by resistance to wear and thus a long service life. To measure highly abrasive materials, such as coarse bulk solids, a hard metal version is available. The high-temperature version of the sensor is suitable for process temperatures of up to 120°C and can thus be employed directly behind the dryer. Because calibration curves for a variety of aggregate materials (sand, gravel, crushed stone) are delivered with the sensor, commissioning of the instrument is straightforward. Once the instrument has been initially commissioned, regular recalibration in production is not necessary.
fLExibLE And rELiAbLE uSE for Any APPLicATion Solitrend sensors are available in different versions for various bulk densities, including low density (animal feed, grains, plastic granulate), very low density and low water content (sawdust, pellets) or even conductive bulk goods and slurry (fresh cement, sewage sludge). All versions feature simple installation and operation, even in demanding applications, plus an integrated transmitter for streamlined plant integration. Solitrend instruments eliminate the need for manual sampling and laboratory analysis, thus allowing plant operators to optimise process costs, improve product quality and reduce energy needs.
Endress+Hauser
www.endress.com March 2022 Instrumentation Monthly
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74
