search.noResults

search.searching

saml.title
dataCollection.invalidEmail
note.createNoteMessage

search.noResults

search.searching

orderForm.title

orderForm.productCode
orderForm.description
orderForm.quantity
orderForm.itemPrice
orderForm.price
orderForm.totalPrice
orderForm.deliveryDetails.billingAddress
orderForm.deliveryDetails.deliveryAddress
orderForm.noItems
| 51


Above left: The CLT core staircase PHOTO: DRMM STUDIO, FRED HOWARTH Above right: The interior of a furniture maker’s workshop PHOTO: DRMM STUDIO, ALEX DE RIJKE


themselves are steel, that includes the stair core and lift shaft.


The floors comprise 19.2m-long CLT panels from Hasslacher Norica Timber, while the walls are 12m-long CLT panels from Stora Enso. All the engineered wood was delivered in a mere 15 truck loads and, said dRMM, building in wood resulted in fewer overall materials deliveries to site and, consequently, a less disruptive construction process than if it had been a standard concrete or steel build. “A concrete or steel building requires many more construction elements but also, as it’s a much heavier structure than a CLT one, needs more material to support itself,” said dRMM associate director Steve Wallis. “The use of CLT as the primary structure also meant that the timber panels could be left exposed and negated the need for plaster boarding / partition walls and fire boarding. So, in short, fewer materials and fewer components.” The “rigorous” fire safety analysis of the building was undertaken by Swiss specialist Ignis and the fire safety methodology included making each of the 14 work space units a separate compartment, achieved through the “integrity of the CLT, detailing of connections and interfaces of the other elements with the CLT”. “WorkStack was initially conceived before the Grenfell Tower fire incident,” said Mr Wallis. “Whilst our building is not a residential one, the shift in regulation, fire safety best practice, along with changes to the insurance market that followed, meant that the fire strategy needed to be reviewed after the initial design. The CLT, which is left exposed virtually everywhere, has been coated with a surface spread of flame retardant. But the building fire strategy does not rely on sprinklers, which was a noteworthy cost saving for a project of this scale.” No timber preservative treatments were required, he added. “The entire building above ground floor is timber, which reduces the need for preservatives and also brings it above any possible flood height from the Thames,” he said.


There were some hold ups in the build process. “Construction started during 2020, in the midst of the Covid-19 pandemic, and progress was affected by supply chain issues,” said Mr Wallis. “Most challenging were CLT factory closures in Europe, as well as material cost inflation. Progress onsite was stalled due to these factors and the site was closed for a period while the CLT fabrication was moved to another factory.”


Once the erection started, however, it progressed rapidly. The CLT panels were craned into place and fixed with around 30,000 screws. A team ranging from five to eight people was all that was needed to build the timber structure and the frame was completed in nine weeks.


Each floor extends 1.5m beyond the one


below, giving a total cantilever of 6.2m, while the building also steps three times, resulting in the 9.3m distance between the façades of the ground floor and the top storey. “The progressive overhangs work both as solar shading and covered delivery area,” said Mr Wallis.


The exterior is clad in a mix of corrugated steel and translucent polycarbonate panels. In terms of sustainability, WorkStack is described as “punching above its weight” and dRMM says it’s “on track to be BREEAM Excellent”. The CLT stacked structure has sequestered 343 tonnes of carbon during timber growth. The building also has around 21% less upfront embodied carbon than the London Energy Transformation Initiative’s (LETI) 2030 Design Target of 350kg CO2


/m2, and 44% less than


RIBA’s 2030 Built Target for whole life carbon off 750kg CO2


/m2.


“The panelised construction also reduces time on site, creates a safer and cleaner working environment and minimises material waste,” said Mr Wallis. “As the load bearing timber walls and ceilings are exposed throughout, this beautiful and economical solution eliminates the need for additional internal finishes and reduces associated material resources and environmental


impacts, while offering biophilic benefits to users.” WorkStack’s 14 units range from 55 -


“offering tenants choice and growth potential within the building”. They provide work space for about 60 people, equating to an employee density of 428 employees per hectare, compared to the London industrial average of 69 employees per hectare. Occupants include furniture makers, knitwear producers, work wear manufacturers and a bicycle/motorcycle workshop.


110m3


“It wasn’t fully occupied from the outset but is now, a little over a year after the first tenants moved in,” said Mr Wallis. “We’ve interviewed a few of them and feedback has been good. They like the timber – of course – and the people on the floors above ground appreciate the security and privacy they get from not being as exposed as in a single- storey, shed-like industrial premises. It’s also very light. Their clients have been interested in visiting too, more so than in other places they’ve been. Also, the acoustic properties of the timber means the sound travels less between studios than in their previous places.”


It’s acknowledged that insurance for timber buildings can be complex. “However, there are several insurers that maintain reasonable terms for well-designed and considered timber buildings,” said Mr Wallis. “While we do know it was not as straightforward as for other buildings in their portfolio, our client for WorkStack has been able to find insurance for the building.”


Overall, concludes dRMM, WorkStack “demonstrates the viability of timber building in an urban environment”. “It’s backed by the Greater London Authority as an exemplar for industrial intensification, and a recipient of Good Growth Funding,” said Mr Wallis. “WorkStack is designed to create a new class of high- density industrial buildings which can be integrated within mixed-use development across cities, and we are now working on different treatments for the concept. ■


www.ttjonline.com | July/August 2024 | TTJ


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77