BAUMA 2022 Ӏ SHOW GUIDE
j Enerpac’s heavy lifting
systems will be demonstrated via its SCJ-Series Cube Jacks and the larger JS-Series Jack- Up – a synchronised lifting and lowering system with self-contained hydraulics in each unit.
EUROGRU SERVICE FS.1002/10 Founded in Frankfurt, Germany, Eurogru is a manufacturer of construction and fast erecting cranes. It also makes small gantry, portal and bridge cranes.
FASSI FN.926/2 Fassi will present its range of articulating loader cranes and timber and recycling cranes. A highlight is the new F1750R-HXP Techno with more powerful control unit, increased speed and data processing capacity and new remote control interfaces and functions.
FAYMONVILLE GROUP FN.822/5
adapter will be seen for the first time in Munich. It has a load capacity of 1000 mT and can be used to transport the latest generation mega blades. A wind turbine blade adapter complete with a self- steering trailer combination will also be shown. Also on display will be
Faymonville’s ModulMAX AP-M heavy duty platform trailer that combines the supporting assist mode with the independent self-propelled mode. This means the driven axles can be switched on and off at any speed. There will also be a four-
axle Eco1000 with hybrid technology, which Faymonville describes as “absolutely groundbreaking”. Finally visitors may
also like to also celebrate MAX Trailer’s 10th year of existence this year!
Cometto’s BladeMax1000 wind turbine rotor blade adapter will be seen for the first time in Munich
Luxembourg-headquartered Faymonville says it will have an even larger stand than it had last Bauma – with a total area of 1,450 square metres. On the stand it will display a diverse range of equipment from its MAX Trailer, Faymonville and Cometto brands. Cometto’s BladeMax1000 wind turbine rotor blade
24 CRANES TODAY
FB GRU FS.902/2 Specialists from Italian tower crane specialist FB Gru, which has been operating since 1957, will be available to guide visitors through its GA range of self-erectors, its GX range of telescopic cranes for difficult job sites and its topless GHS tower cranes.
FERRARI INTERNATIONAL FN.1025/1 Reggio Emilia Italy-based Ferrari will present its wide range of hydraulic accessories for cranes.
FM GRU FS.1002/2 Italian tower crane manufacturer FM Gru was originally established in 1920 as a family run company. In 1963 the company focussed
on tower crane production. At Bauma its experts can talk you through its range which includes: RBI self erecting cranes; RBI - FA self erecting cranes with axles; TLX flat tops; TCK saddle jibs; and LK luffing hydraulic tower cranes.
FRACO MANUFACTURING FS.1104/8 Quebec, Canada-based company Fraco, a manufacturer of vertical transport equipment and systems for persons and materials, acquired the Spanish brand Torga in 2019 as part of a drive to increase its production capacity and accelerate the implementation of its manufacturing activities in Europe. Experts will be available to
show you its range of lifting equipment that includes construction lifts, transport platforms, industrial elevators and work platforms. Highlights include the
Torga PT elevator for tower cranes and for the construction and maintenance of wind turbines. It carries a maximum of two people at a speed of 24 m / minute.
GALIZIA FS.1104/7
Italian crane manufacturer Galizia will be happy to talk visitors through its range of electric and diesel pick and carry cranes and electric industrial telehandlers.
GEDA FS.1004/1
Geda, a German manufacturer of construction hoists, including inclined rope hoists, transport platforms, and personnel and material hoists, will explain to visitors
how its products can help, particularly with safe operator lifts. Representatives will also be available to explain how its brand-new BIM portal – the Geda BIM Centre – can provide information throughout the entire life cycle of a building, enabling networked planning and collaboration between different technical sections. The company is also
celebrating the 25th anniversary since its first Geda transport platform.
GOLDHOFER FN.823
Goldhofer’s stand will look like this
Memmingen, Germany-based Goldhofer will use Bauma to premiere its new FT Series vehicle concept. With a focus on operational flexibility, it combines simple handling with the versatility needed to meet a wide variety of transportation needs, says Goldhofer. Goldhofer will not reveal any further details until the trade show gets underway. The company is also
presenting the latest addition to its Star family: the Trailstar which it unveiled at IAA Transportation. This three- to five-axle air-suspension trailer is a new construction with a range of features for optimum use of the loading area and centre of gravity plus superb manoeuvrability. Also on display will be
a further model from the Stepstar line: the new force- steered Stepstar Z.
f
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81
