BAUMA 2022 Ӏ SHOW GUIDE
j range of different cranes
including tower cranes, ship and offshore cranes, heavy duty industrial cranes, harbour and container cranes, factory cranes, mobile cranes and mining applications.
CLP FS.1104/5 Italian gantry and lifting beam manufacturer CLP produces hydraulic lifting gantries up to 1,200 tonnes; 150 to 360 tonne capacity lifting beams; and skidding systems up to 400 tonnes. It is also available for design and manufacture of custom designed equipment. At Bauma it is sharing a stand with Mouvers.
COMANSA FS.1103/1
combinations of 1T (direct pulling) and 2T. The maxi- mum load capacity is 8t with the 1T configuration and 16t with the 2T configuration. The maximum load at the jib end is 3,400 and 3,150kg, respectively.
The luffing moves the jib and counter jib jointly by a hydraulic cylinder at the cathead and jib hinge assembly. The hydraulic pump unit is located on a movable platform in one piece. From the cabin there is
direct visibility of the lifting mechanism of between 50kW(standard) and 65kW (optional). Thanks to the Effi- Plus technology, it is possible to increase the speed of the lifting mechanism without affecting consumption, which allows loading cycles to be considerably reduced, thereby improving the productivity of the crane.
The design of this new Comansa’s LCH300
Spanish tower crane manufacturer Comansa will launch a new luffing jib tower crane: the LCH300. The company says the new crane marks a milestone as its first ever hydraulic model. It has a maximum load capacity of 16 tonnes and a modular jib with a reach of 25 to 60 metres, with configurations every five metres.
The crane can be
assembled with 2.5 x 2.5m tower sections. It has a minimum working radius of four metres and a minimum radius of nine metres when out of service. It has manual transmission
22 CRANES TODAY
rotating part - jib, cathead and counter jib - as well as the mechanism, cabin and hydraulic unit platforms, optimises the transport of this model, which may be supplied by eight trucks or containers. This new luffing jib crane
from Comansa incorporates the Cube Cab (L or XL) with Split type air conditioning. The cabin platform, like the lifting and hydraulic unit platforms, can be transported in a single piece. Comansa says luffing jib
tower cranes offer optimal performance where horizontal jib cranes cannot move loads freely due to space limitations. Now, with the incorporation of the LCH300 hydraulic model, the luffing mechanism is optimised to offer even greater performance and an
DELTA CRANES FS.1102/2
Italian pick and carry and electric cranes specialist Delta can be found on Raimondi’s stand and will happily explain its latest products.
DOLL FAHRZEUGBAU FN.830/1 Oppenau, Germany-based special vehicle manufacturer Doll produces transport vehicles for timber transport and heavy transport, plus for the airport equipment and defence sectors.
ENERPAC FS.1105/1 Centrepiece of the Enerpac stand will be its new SBL600 telescopic hydraulic gantry along with its entry-level gantry system for industrial
efficient assembly, as well as reduction of the radius when out of service. A new fleet management
product/app will also be presented, plus a new bolted mast section for the European market.
CORMACH FN.722/10
Montichiari, Italy-based producer of truck mounted cranes, recovery cranes and platforms will be available to talk to visitors about its full range of products.
CREATIVE BUSINESS SOLUTIONS (CBS) FS.1106/3 Paris, France-headquartered Creative Business Solutions is a company of civil engineers that specialises in developing MethoCAD software under AutoCAD and Revit for tower cranes.
movers – the ML40 Mini Lift Gantry. The company’s new E-mover battery- powered load skate will also be demonstrated together with its SCJ-Series 50T Cube Jacks-Ups. The stand will also feature Enerpac’s growing range industrial tools and cylinders now available for heavy lift as well as construction and maintenance projects.
The new Enerpac EMV-Series
E-mover battery-powered load skate The SBL600 Super
Boom Lift hydraulic gantry is a three-stage telescopic hydraulic cylinder with a rectangular boom for increased capacity. It offers a first stage lifting capacity of 674 tonnes and 416 tonnes at the third stage. It has a lifting height of 10.6 metres making it particularly suitable for applications such as placing gas turbine generators and power transformers in powerplants, says Enerpac. The new Enerpac EMV-
Series E-mover battery- powered load skate is a self-propelled skate featuring a central load bearing plate. It is designed to be used in conjunction with the Enerpac MLS-Series wheeled load skates. The E-mover on show at Bauma will include a hydraulic lifting cylinder in place of a load bearing plate and has a 50 tonne load capacity split between the E-mover and wheeled load skate.
f
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81
