GUEST COLUMN | CONDRA
PLATREEF SHOW-STEALER
High-capacity overhead cranes often make headline news because of their impressive size and technical complexity. Their smaller and simpler cousins – workhorses of the factory and general engineering workshop – should not be overlooked, says Marc Kleiner, MD, Condra.
headgear crane, through to smaller single- and double-girder cranes, hoists and crawls, and no fewer than 19 chain blocks, including a 2-ton explosion-proof chain hoist. All are for installation at Platreef Mine’s Number Two Shaft, part of the Platreef PGM project near Mokopane, Limpopo Province, South Africa. Often the go-to company for buyers seeking proven ability at the more complex end of the technical design spectrum, these orders highlight Condra’s capabilities in smaller and more standard lifting equipment. Nevertheless, the standout machine for Platreef remains the very large headgear crane: a 40/5-ton double-girder electric overhead travelling giant spanning 17 metres, which will itself weigh almost as much as its 40-ton maximum load. Murray & Roberts Cementation supplied
K
the procurement recommendation for this machine, which will install and maintain the shaft’s headgear-mounted winders and sheave wheels, raising and lowering component parts over a lifting height of 94 metres. The order was placed by Ivanplats. Switching to a long list of other overhead cranes and hoists ordered from Condra
leiner is commenting on a slew of recent orders taken for Platreef Mine, ranging from a giant 40/5 ton double-girder
for Platreef by consulting engineers Dowding Reynard and Associates, Kleiner emphasised their importance. “These are all workhorses,” he said. “Even the smallest 2-ton explosion-proof chain hoist will play an important role.” Condra’s first deliveries to Platreef took place in late 2023, comprising a short- headroom hoist for the mine’s tailings filter, and a K-Series hoist for the mill feed conveyor. Both are being used for maintenance work. A 5-ton single-girder overhead crane
for the mine’s filter building followed soon afterward, with a 10-ton double-girder overhead crane for the plant workshop. One of these machines was dust-ignition- proof rated to ATEX Zone 21/22 standard. Control of both is by radio remote with manual pendant back-up. “Compared with the headgear crane,
these are simpler, more straightforward machines, but each one meets an important requirement,” Kleiner said. Elaborating on the headgear crane itself,
Kleiner explained that design challenges had included the delivery of above average lifting speeds over the very high lifting height of 94 metres. The 40-ton main hoist will travel at up to 8,4 metres per minute, and the 5-ton auxiliary hoist at up to 12,2 metres per minute. Both speeds are variable.
Condra managing director Marc Kleiner. Kleiner explained that the modularity of
Condra’s hoist range made it possible to accommodate the Platreef specifications, with careful design of the crane’s end- carriages facilitating installation at lowest possible cost to the customer. “We replaced the normal one-piece end-
carriage with a double-bogey design,” he said. “This will allow a 35-ton tower crane to lift the headgear crane into position one girder at a time. Without the doubled- bogey arrangement the entire crane would have had to be lifted into position as an assembled unit, a more difficult operation.” Other features of the headgear crane include an automatic storm brake to counter wind loading, a full-length work platform, and radio control with mobile pendant back-up. Platreef has been under development since 2020 by Ivanplats (Canada-based Ivanhoe Mines’ South African subsidiary), and comprises three vertical production shafts, two ventilation shafts, a concentrator and associated supporting infrastructure. Beginning this year, mine production
Road delivery of a typical overhead crane. (NB This photo does not depict the cranes mentioned in this story) 16 | October 2024 |
www.hoistmagazine.com
will tap a 26-metre-thick flat ore body extending over several kilometres to deliver 12 megatons per annum over a lifespan of three decades, positioning Platreef among the largest platinum group metals (PGM) mines in the world. Annual yield is expected to exceed one million troy ounces of palladium, platinum, rhodium and gold, plus useful quantities of nickel and copper.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99
